Effektsats S&S Hot Set Up 124″ svart H-D 06-17
S&S Hot Set Up 124" trimsats för obalanserade Twin Cam
Läs mer
- Uppgraderar original 96" eller 103" motor till 124" kapacitet i befintliga vevhus
- Komplett sats med 4.125” borrade cylindrar, smidd kolvsats med platt topp och 4.625” slaglängd på svänghjul
- Ger ett kompressionsförhållande på 10.8:1 med de medföljande Super Stock 91 cc topplock
- Inkluderar S&S 640 Easy Start kamaxlar med kuggdrivning, premium lyftare, justerbara stötstänger och rullvipparmar
- Svart skrynkellack (black wrinkle) med bearbetade flänsar
- Packningar, monteringsdetaljer och instruktioner ingår
- Tillverkad i USA
För icke-balanserade Twin Cam-motorer, passar ej Twin-Cooled eller Trike/trehjuliga modeller (p.g.a. hög kompression). Kräver omkalibrering av EFI eller anpassat tändsystem och stor förgasare (t.ex. S&S Super G), samt större gashandtagshus (t.ex. 58 mm). Bränsle- och tändsystem ingår ej. S&S rekommenderar Timken-vevhuslager med JIMS lagerinsats (MCS 978519) och verktyg (MCS 978517) för 03–17 modeller.
Passar: Dyna 06-17
| Färg | Black |
| Produkt-typ | Performance Kit |
| Tillverkarens Art. Nr. | 900-0568 |
124" Hot Set Up Engine Performance Kit
- For non-balanced Twin Cam models
- Converts a stock engine to 124" using the stock crankcases
- Include S&S Super Stock 91 cc cylinder heads , 4.125” bore cylinders, forged big bore flattop pistons, S&S 4.625” stroke flywheel assembly, S&S 640 gear drive Easy Start cams, S&S premium tappets, S&S adjustable pushrods, roller rocker arms, and all hardware, gaskets and instructions
- Made in the USA
- EFI system must be recalibrated.
- Fuel or ignition system not included.
- All clearances and assembly specifications will need to be checked.
- Although the engine is 0.960" taller than stock, there are no frame clearance problems, and a stock EFI throttle body will fit because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold.
- Black wrinkle painted with highlighted fins
- Will upgrade your stock 96" or 103" engine to 124" capacity
- Kit comes complete with stroker flywheels, big bore cylinder & flat-top piston kit that gives a 10.8:1 CR with the included 91cc high flow heads
- The 640 Easy Start gear driven cams provide the lift required to let this engine breathe but insures easy turn-over with stock starter & battery
- Kit adds .096" to engine height
- Note 2: You will build a serious high performance engine
- It is therefore not compatible with stock ignition and stock (too small) throttle housings
- A large throttle housing, as the 558678 S&S 58mm single bore unit, and high performance ECU is required
- Carbureted engines will require a ignition system with adjustable advance curves and large carburetor, as the S&S Super G or similar
- Note 3: S&S recommends MCS 978519 JIMS crankcase bearing insert, for 03-17 Twin Cam models, to replace the stock roller bearing for the stronger early style Timken bearing
- See MCS 978517 for required JIMS tool
- The correct Timken bearing can be ordered as MCS 508960 / OEM 9028
Not for use on twin cooled motors. Will fit '06 Dyna. Not recommended for compression ratios higher than 10:1 for Tri Glide or other three wheel models (including conversions) due to extra loads caused by the lugging nature of these bikes. Detonation and subsequent engine damage may result.
Fits: 06-17 Dyna; 07-16 FLT/Touring (Excl. Twin-Cooled models) (NU)