Kamaxelsats S&S 510G H-D 99-06

13 070 kr

S&S 510G kamaxelsats med kugghjulsdrivning
Läs mer

20072510 S&S
  • Bolt-in-kamaxel för 88", 95", 96" och 103" motorer med kompressionsförhållande under 9.7:1
  • Ventillyft: .510"
  • Starkast effekt i registret 3000–5500 RPM
  • Kuggdrivning eliminerar kedjesträckare och kedjeslapp för exaktare ventiltider och ökad tillförlitlighet
  • Kan användas tillsammans med original stötstänger och ventilfjädrar
  • Satsen innehåller kamaxlar med inre drev, yttre kamdrev samt monteringssats med kåppackning, lager, pluggningssats för oljekanal, låsring, o-ring och instruktioner
  • Tillverkad i USA

Kuggdriften ger en mekaniskt starkare och pålitligare konstruktion, men kan ge ett något högre mekaniskt ljud än kedjedrift. Material kan behöva slipas bort från insidan av transmissionskåpan för att ge frigång åt de yttre dreven.

Passar: H-D 99-06

Produkt-typ Cam Kit
Tillverkarens Art. Nr. 33-5177

510G Camshaft Kit

  • Cams designed as bolt-in cam for 88", 95", 96" and 103" engines with compression ratios below 9.7:1
  • Kit includes camshafts with inner gears, outer cam drive gear kit and camshaft installation kit: gearcover gasket, bearings, oil passage block off kit, retaining ring. o-ring and instructions
  • Stock pushrods and valve springs are acceptable
  • Strongest from 3000-5500 RPM
  • Made in the USA
  • 510." valve lift
  • The gear drive system is in fact a revolutionary different and much more reliable construction
  • Especially in high lift/performance applications, when compared with the OEM chain-drive design
  • A gear driven camshaft is stronger and will not give any of the mechanical problems connected with the OEM chain driven camshafts
  • The S&S gear drive kit will increase valve timing accuracy, and therefore horsepower, by eliminating the timing chain lash and loosely fit stock cam gears
  • The only downside of gear drive is that you may experience a slight increase in mechanical sound, this is why OEM is using a chain
  • It has no other mechanical advantages whatsoever
  • Since the chain guides and tensioner are eliminated there is no longer the possibility for these parts to fail and damage other engine parts
  • The S&S gear drive kit reverses the direction of rotation of the rear cam, providing additional operating clearance between cam lobes
  • As a result, higher cam lifts are possible with the S&S gear driven cams
  • Note: With the exception of the 475G and 510G cam, adjustable pushrods (like MCS 503573) are required to compensate for the smaller camshaft base circle of these cams
  • Note: Material may have to be removed from the inner surface of the OEM gear cover before installation of the S&S outer drive gears
  • Note: Using .625", .635", .640" and .675" lift cams will require crankcase clearancing
  • Note: OEM beehive valve springs of 04-17 Dyna; 04-17 Softail and 04-16 Touring models will acommodate valve lifts up to 590" valve lift and, 160 lb. of valve seat force, up to 6200RPM
  • Running higher than 6200 RPM or lifts greater than 590" will require performance valve springs

Fits: 99-06 Twin Cam (Excl. 2006 Dyna) with stock non-hydraulic chain tensioners (NU)


Liknande produkter

Kamaxel S&S TC Twin Cam Models equipped with Kamaxel S&S TC Twin Cam Models equipped with
Drivsats kedja S&S H-D 08-17 330-0844
Drev kamaxel S&S 330-0846 H-D 08-17
Drev S&S 330-0847 H-D 08-17
S&S Drev S&S 330-0847 H-D 08-17
09251708
860 kr
Kamkedja S&S yttre enkel Softail 07-17 Kamkedja S&S yttre enkel Softail 07-17
Drev S&S 33-4160X Undersized Softail 00-17