Vevhus S&S Application natur H-D 84-00

33 430 kr

S&S vevhus för motorer med 4.000" cylinderborrning
Läs mer

09200158 S&S
  • Framtaget för högpresterande motorer med cylinderborrning på 4.000"
  • Kambröstet är flyttat 0.250" utåt för att hantera stora cylinderborrningar
  • Frigång för slaglängder upp till 5.000"
  • Däckshöjd: 5.875"
  • Flyttad oljeupptagning i kambröstet ger förbättrad evakuering och minimerar oljeöverföring vid höga hastigheter
  • Portad vevhusventilationskanal och bearbetat fönster för optimalt flöde mellan svänghjul och kambröst
  • Förberett för original oljefilterenhet från 92–99 Big Twin
  • Maskinbearbetat för vevaxelpositionssensor för EFI, S&S IST-tändning och VFI-insprutning (pluggkit ingår för övriga användningsområden)
  • Platt delningsyta som centreras med styrstift (utan spår, ring eller centreringspinnbultar)
  • Tillverkat i USA

Vevhusventilation kan ske via två vevhusventiler, genom topplocken eller båda kombinerat. För motorer större än 95" rekommenderar S&S att båda vevhusventilerna används.

Passar: H-D 84-00

Special Application Crankcase

  • Designed for high performance engines with cylinder bores 4.000"
  • Cam chest is moved outward 0.250" to allow crankcases to handle large cylinder bore sizes
  • Clearanced for strokes as long as 5.000"
  • Relocated cam chest oil pick-up increases gear case scavenging and virtually eliminates oil carry-over at sustained high speeds
  • Machined to accept the stock oil filter assembly used on '92-'99 Big Twins
  • A ported breather passageway and a machined breather window allows the air/oil mist to flow from the flywheel cavity to the cam chest of the engine with the least possible restriction
  • Crankcase venting can be achieved via two crankcase breathers, the cylinder heads, or both; S&S recommends using both crankcase breathers in engines larger than 95"
  • Deck height is 5.875"
  • Made in the USA
  • Machined for installation of a crank position sensor which allows the cases to be used in EFI applications and also allows easy installation of S&S IST Ignition and VFI Fuel Injection; a plug kit is included for applications that do not use a crank position sensor.
  • All S&S crankcases manufactured after June 1, '08 do not have case interlock groove and ring and do not use case alignment studs. Case mating surface is flat, and cases are aligned with alignment dowels.

Liknande produkter

Kamaxel S&S TC Twin Cam Models equipped with Kamaxel S&S TC Twin Cam Models equipped with
Drivsats kedja S&S H-D 08-17 330-0844
Drev kamaxel S&S 330-0846 H-D 08-17
Drev S&S 330-0847 H-D 08-17
S&S Drev S&S 330-0847 H-D 08-17
09251708
860 kr
Kamkedja S&S yttre enkel Softail 07-17 Kamkedja S&S yttre enkel Softail 07-17
Drev S&S 33-4160X Undersized Softail 00-17