Tændspole Dynatek Dyna 2000i 1 Big Twin 70-99

4 761 DKK

Dynatek programmerbart elektronisk tændingskit med tændspole
Læs mere

902537 Dynatek
  • Indeholder Dyna 2000i tændmodul og en Dynatek 3 ohm Twin-Fire II single fire tændspole
  • Helt selvstændig enhed, der monteres skjult under motorens knastdæksel
  • Fungerer i alle kombinationer af single-fire eller dobbelt-fire med enkelt eller dobbelt tændrør pr. topstykke
  • Ti forindstillede tændkurver og justerbar omdrejningsbegrænser fra 6000 til 7500 rpm
  • Justerbar tændingsforsinkelse (retard) til lattergas- og turboapplikationer
  • Indbygget datalogning af driftstimer, tid med fuld gas, maks. omdrejninger, starter m.m.
  • Fuldt PC-programmerbar til egne tændkurver og indstillinger (kræver separat programmeringskit)
  • Fremstillet i USA

Passer ikke til modeller med brændstofindsprøjtning og er ikke kompatibel med kickstart. Kræver støjdæmpede tændkabler med kerne af kulfiber, grafit eller spiral core. Tændrotor og boltsæt er ikke inkluderet, men genbruges fra original eller købes separat (920402).

Passer til: Big Twin 70-99

OEM-nr.: 32402-83

Kategori Ignitions
Produkt-typ Ignitions

2000I PC Programmable Electronic Ignition Kit

  • Completely self-contained so entire unit hides under the cam cover for a clean look on custom bikes
  • Single-fire operation down to zero rpm for easier cranking and kicking
  • Will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads
  • Ten advance curves cover a broad range of engine builds and riding styles
  • Engine over-rev protection, adjustable from 6000 to 7500 rpm
  • Adjustable timing retard for nitrous and turbo applications
  • VOES indicator lets you monitor VOES switch at a glance
  • Built-in tach driver can be used to activate shift lights, auto-shifters and other accessories
  • Easy static timing with built-in timing indicator
  • Intelligent over-current/short-circuit protection
  • Active dwell control
  • Over-voltage protected against momentary spikes
  • Data recording includes total engine hours, time wide-open throttle, longest time operating at wide-open throttle, max rpm, seconds near rev limit and number of engine starts
  • PC programmability makes possible an eight-point, fully definable, wide-open throttle curve and a fully definable part throttle curve, rev limit programmable in 50 rpm steps, programmable dead-cranking revs 0-5, rear cylinder offset, total of +/- 10°, programmable rev limiter, security lock out (pin # activated), single or dual fire
  • Programming and downloading data and graphs from module requires proper programming kit (includes CD, cables and instructions)
  • Pigtail connector enables the user to connect the ignition to a PC to either download recorded info from the ignition or program their own power curves, rev limits, dead revs or rear cylinder off-set timing; connector remains on bike
  • Made in the USA
  • Not for fuel-injected models
  • Programming kit is not necessary to use all selectable functions of the current ignition.
  • Dyna 2000i ignition module & 1 coil kit
  • 2000i ignition module, complete with one Dynatek 3 ohm Twin-Fire II single fire coil
  • The module is simply adjustable with switches, nothing else required. features include an intelligent overvoltage/overcurrent protection, a short circuit protection and an adjustable retard timing
  • But if you want more... it is fully programmable with the, optional available, programming kit (902528) and harness (902524)
  • Another new feature is data recording
  • The module records a series of data and stores it
  • The recorded data can be downloded with a PC to show engine builders how the engine was used (or abused), should there be a problem in the future
  • Note: It is recommended to use ignition modules & coils of the same manufacturer
  • Intermixing different brands may cause premature failure
  • Coil must be within range of 2.5 to 3.5 ohms
  • Carbon, graphite or spiral core type suppression spark plug wires are required
  • Note: Dyna does not offer the ignition rotor
  • The OEM Harley rotor (OEM 32402-83) and mounting bolt (OEM 2611B) should be re-used or ordered separately as 920402 rotor & bolt kit
  • Note: Not compatible with kickstart models

Fits: 70-99 Big Twin (Excl. Twin Cam) and 71-03 XL Sportster (NU)