Knastaksel Feuling Reaper M8 508 Softail 18-26

3 098,1 DKK

Feuling Reaper 508 kædedrevet knastaksel
Læs mere

09251283 Feuling
  • Reaper 508 knastprofil til kædedrevet drift
  • Giver mere effekt og drejningsmoment i omdrejningsområdet 2 250–5 900 rpm
  • Bløde knastlober, der reducerer slid og støj i ventilsystemet
  • Duration indsug/udstødning: 237°/241,5°
  • Indsugsventil åbner/lukker: 20,5°/37°
  • Ventilløft TDC: .180"/.98.5"
  • Knastoverlap: 38°
  • Fremstillet i USA

Udviklet til motorer på 114" (1,87 l) eller større med øget kompressionsforhold. Kræver ventilfjedre til højt løft (kompatibel med SE-topstykker, som har dette som standard), og kraftige skubbestænger anbefales kraftigt, gerne i ét stykke frem for justerbare. Passer ikke til 2023–2024-modeller med 121"-motor.

Passer til: Softail 18-26

Produkt-typ Cam
Tillverkarens Art. Nr. 1349

Reaper 508 Cam

  • Produce more power and torque in the riding RPM range, improving throttle response, acceleration and fuel mileage
  • Smooth camshaft lobe ramps are easier on valvetrain components and eliminate excessive valvetrain noise and wear
  • Dyno proven and track tested
  • The Grim Reaper aggressive pulling power with a nasty sound
  • This camshaft revs up faster than the 521 grind, sounds nastier and pulls harder, but is more difficult to tune
  • The Reaper 508 grind will shine in 114" and larger cubic inch engines with added compression ratio
  • Ported cylinder heads are not required, but will complement the cam and add even more pulling power throughout the range
  • The stock throttle body produces an excellent powerband and use of a high flow throttle body will increase peak power numbers
  • A high-flow exhaust system and air cleaner is highly recommended for optimal performance
  • High-lift valve springs are required
  • Heavy-duty pushrods are highly recommended
  • 2250 - 5900 rpm range
  • Made in the USA
  • Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
  • EU: The Reaper 508 grind will shine in 1,87 L and larger cubic inch engines with added compression ratio
  • Due to the unstable nature of this 4-valve engine design with one rocker arm activating two valve springs, Feuling highly recommends running one-piece pushrods over quick-install adjustable pushrods to maintain maximum cam/ valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues.
  • Reaper M8 chain drive 508 Camshaft
  • Intake open/close: 20.5/37
  • Duration in/ex: 237/241.5
  • Valve lift TDC: .180"/.98.5"
  • Overlap 38
  • RPM range 2.250-5.900
  • Note: Compatible with SE heads since these are equipped with high lift springs as standard

Not for '23-'24 models with 121" motors.

Fits: 18-26 Softail; 17-26 FLT/Touring (excl. 23-26 VVT); 17-26 Trikes


Lignende produkter

Knaststøtteplade OE+ Feuling Milwaukee-Eight H-D 17-
Plade knastaksel Feuling 588056k-4f7a675a
Feuling Plade knastaksel Feuling
09320192
4 547,1 DKK
Knastaksel Feuling Reaper M8 538 Softail 18-26
Knastaksel Feuling Reaper 472 HP Softail 18-26 707548k-b309c75c
Knastaksel Feuling Reaper M8 472 Softail 18-26 993525k-9c04a652
Knastaksel Feuling Parts Reaper 592 H-D 17-