Knastaksel Feuling Reaper M8 538 Softail 18-26
Feuling Reaper 538 knastaksel med kædetræk
Læs mere
- Reaper 538 knastslibning til kædetræk (Gen 2 bolt-in)
- Effektområde: 2250–6250 rpm
- Indsugning: .538 løft, duration 239 @ .050, knastvinkel 99
- Udstødning: .542 løft, duration 246 @ .050, knastvinkel 105
- Aggressiv knastakselprofil med en rå lyd
- Optimeret til 124" og større motorer med højere kompressionsforhold
- Feuling anbefaler, at knastakslen kombineres med deres Race Series oliesystem
- Fremstillet i USA
High Lift ventilfjedre er påkrævet til Gen 1-motorer samt på originale topstykker (se Feuling Beehive fjedersæt 993530 eller 588021). Kraftige stødstænger i ét stykke anbefales kraftigt (se 993528). Højflow-udstødning og luftfilter anbefales for optimal ydelse.
Passer til: Softail 18-26
Reaper 538 Cam
- Gen 2 bolt in
- Revs up fast and pulls hard in engines with big bore cylinders, modified cylinder heads, intake,compression and exhaust
- The Reaper 538 grind will shine in 124” and larger cubic inch engines with added compression ratio
- The stock throttle body produces an excellent powerband and use of a high-flow throttle body will increase peak power numbers
- Ported cylinder heads are not required, but will complement the cam and add even more pulling power throughout the range
- A high-flow exhaust system and air cleaner is highly recommended for optimal performance
- 2250 - 6250 rpm range
- Made in the USA
- Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
- Requires high lift valve spring for Gen 1 engine.
- Reaper M8 538 camshaft
- Chain drive
- Aggressive camshaft with a "nasty" sound
- FEULING recommends matching this cam with our RACE SERIES oiling system
- NOTE: High Lift valve springs are required on stock cylinder heads, see FEULING BEEHIVE valve spring kit 993530 or 588021
- Heavy Duty one piece pushrods are also highly recommended see 993528
- 5,975
- Grind: 538 ..................Valve Lift Open Close Duration @ 50" lift @ TDC Lobe Centerline Intake .538 20.5 BTDC 38.5 ABDC 239 .180 99 Exhaust .542 48 BBDC 18 ATDC 246 .157 105 Overlap: 38 *Cam specs measured in the engine on the lifter @ 0.050" using a 1.61 rocker arm ratio
Fits: 18-26 Softail; 17-26 FLT/Touring (excl. 23-26 VVT); 17-26 Trikes