JIMS, Powerglide hydraulic tappet. Standard .8420" O.D.
Jims Powerglide II hydrauliske ventilløftere
Læs mere
- Krop i billetfræset stål med håndhonet hydraulikkammer og oliesmurt aksel
- Standard udvendig diameter på .8420"
- Rullens vinkelrethed holdes inden for .0002", og rullens bredde er øget
- Over 30 % højere dynamisk belastningskapacitet
- 10 % øget smørekapacitet til hydraulenhed og ventilsystem (top end)
- 100 % øget smørekapacitet til rulle, knaster og knastlejer for forbedret køling
- Konstrueret til at eliminere sammenfald af hydraulenheden og bevare nul ventilspil
- Fremstillet i USA
Kompenserer for varmeudvidelse og fungerer også med knastaksler beregnet til mekaniske løftere. Fungerer som en direkte opgraderet erstatning for originale standardløftere og løftere med høj kapacitet.
Passer til: Twin Cam 99-17
OEM-nr.: 18538-99C
| Storlek | Standard |
| Produkt-typ | Lifter |
| Tillverkarens Art. Nr. | 1807 |
| OEM-nr | 18538-99C |
| Osaker Eastern-beskr. | Tappets STD (with hydraulic unit) BIG TWIN 1999-present / Tappets STD (with hydraulic unit) SPORTSTER 2000-pres. |
-
Hämta1807-IS.pdf406.69 KB
Powerglide II Hydraulic Tappets
- These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
- Billet body
- Increased roller width
- Roller perpendicularity held to .0002"
- Hand-honed hydraulic unit cavity
- Dynamic load capacities increased over 30%
- Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
- Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
- Made in the U.S.A.
- Powerglide hydraulic tappet. Standard .8420" O.D
- JIMS PowerGlide tappets will give you a superior hydraulic function when compared with OEM style equipment, a billet steel body with hand-honed hydraulic unit cavity and an oil fed axle
- To get full power, you must have zero valve lash and eliminate collapsing of the hydraulic unit as is found in the OEM unit, also called 'the shock absorber syndrome'
- Failing to keep the valve open the full amount results in power loss
- The JIMS PowerGlide tappets come as close to a solid tappet as possible, but are still able to compensate for heat expansion
- They will even work well with solid style camshafts
- Fits as a direct upgraded replacement for OEM 18538-99C Standard and 17900022A High Capacity tappets
Fits: 99-17 (NU) Twin Cam; 17-26 M8; 00-22 (NU) XL Sportster; 08-12 (NU) XR1200; 00-10 (NU) Buell XB