JIMS, Powerglide hydraulic tappet. +.005" o.s.
Jims Powerglide II hydrauliske løftere +.005" overdimension
Læs mere
- Fremstillet af billet-stål med håndhonet hulrum til hydraulenheden
- Overdimension: +.005" (standard er .8420" udvendig diameter)
- Oliefødet aksel og øget bredde på rullen
- Vinkelrethed på rullen holdes inden for .0002"
- Dynamisk belastningskapacitet øget med over 30 %
- Smøringskapacitet for hydraulenhed og topsæt øget med 10 %
- Smøringskapacitet for rulle, knaster og knastlejer øget med 100 % for bedre køling
- Fremstillet i USA
Opgraderet erstatning i overdimension for originalenheder. Konstrueret til at eliminere, at hydraulenheden falder sammen ved høj belastning, og fungerer også godt sammen med knastaksler af solid-typen.
Passer til: Twin Cam 99-17
OEM-nr.: 18538-99C
| Storlek | Oversize (+0,005 tum) |
| Produkt-typ | Lifter |
| Tillverkarens Art. Nr. | 1810 |
Powerglide II Hydraulic Tappets
- These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
- Billet body
- Increased roller width
- Roller perpendicularity held to .0002"
- Hand-honed hydraulic unit cavity
- Dynamic load capacities increased over 30%
- Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
- Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
- Made in the U.S.A.
- Powerglide hydraulic tappet. +.005" o.s
- JIMS PowerGlide tappets will give you a superior hydraulic function when compared with OEM style equipment, a billet steel body with hand-honed hydraulic unit cavity and an oil fed axle
- To get full power, you must have zero valve lash and eliminate collapsing of the hydraulic unit as is found in the OEM unit, also called 'the shock absorber syndrome'
- Failing to keep the valve open the full amount results in power loss
- The JIMS PowerGlide tappets come as close to a solid tappet as possible, but are still able to compensate for heat expansion
- They will even work well with solid style camshafts
- Fits as a oversized diameter upgraded replacement for OEM 18538-99C Standard and 17900022A High Capacity tappets
- Note: Standard is .8420" O.D
Fits: 99-17 (NU) Twin Cam; 17-26 M8; 00-22 (NU) XL Sportster; 08-12 (NU) XR1200; 00-10 (NU) Buell XB