Svinghjul S&S T-series 124" 4-1/8"
S&S 3-delt svinghjul til 124"-motorer
Læs mere
- Fremstillet i 4140-stål med integrerede hovedaksler og 1.671" krumtap
- Passer direkte i originale krumtaphuse uden modifikationer
- 4-5/8" slaglængde og 8-1/2" diameter på svinghjul
- Afbalanceret til en samlet stempelvægt på 1035 gram
- Til 124" T-series motorer med 4-1/8" boring
- Krumtappet tillader udskiftelige lejebaner i plejlstængernes nedre ende
- Udformet til brug med Timken-konvertering (sælges separat)
- Fremstillet i USA
Passer til originale krumtaphuse 99–02 og alle S&S-krumtaphuse uden modifikation. Til 03–17 Twin Cam kræves opgradering til Timken-lejer, da rullelejer ikke godkendes af S&S. Til motorer med slaglængde over 4" kan S&S stempeloliedyser samt udskæringer i stempelskørtet være nødvendige for frigang.
Passer til: 99-06 Twin Cam (ekskl. 2006 Dyna), Standarderstatning for S&S T124/T116-motorer
OEM-nr.: 24004-03B, 24605-07
| Material | Steel |
| Produkt-typ | Flywheel Assembly |
| Tillverkarens Art. Nr. | 320-0475 |
Replacement Flywheel Assembly
- S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
- Fits directly in stock crankcases with no modifications
- Made in the U.S.A.
- Flywheel assembly without sprocket bearing race are designed for use with Timken bearing conversion (sold separately).
- Flywheel assembly for 124" T-series 4-1/8" bore engines
- 4-5/8" stroke with 8-1/2" diameter flywheels
- Balanced to 1035 grams total piston weight
- No hassle in rebuilding or getting the right parts, it's all here in one package
- These are exactly set-up like the flywheels used in current S&S production engines
- Note: Engines with strokes exceeding 4" may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact
- Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods
- The first generation of S&S crankpins, in use up to 2012, were 1.500" diameter
- The second generation crankpins, in use since 2013, have the larger 1.671" OEM diameter crankpins
- Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available
- Note: Following is regarding 03-17 models
- S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications
- Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution
- However, S&S feels this roller bearing will not take the side loads produced in a high performance motor
- S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used
- To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available
- Bearing inserts only are available as 978519, bearings only as 508960
- Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
- It is of importance that a knowledgeable mechanic will install & make adjustments as required
Fits: 99-06 Twin Cam (excl. 2006 Dyna); Stock replacement for S&S T124/T116 engines