Svinghjul S&S 4-3/8" 96" 103" Dyna 06-17
S&S tredelt svinghjulssæt med 4-3/8" slaglængde
Læs mere
- Tredelt konstruktion med integrerede aksler fremstillet i 4140 stål
- Større krumtapstap med 1,671" diameter
- Passer direkte i originalt krumtaphus uden modifikationer
- Plejlstænger med koniske stempelboltender, der er kompatible med originale stempler
- Afbalanceret til 1035 gram samlet stempelvægt
- Med presset lejebane til originalt rullelejer (ikke Timken)
- Fremstillet i USA
Motorer med slaglængde over 4" kan kræve S&S stempeloliedyser samt udskæringer i stempelskørtet for frigang. Svinghjulssæt uden kædehjulslejebane er beregnet til Timken-konvertering (sælges separat). Montering og tilpasning kræver fagkundskab.
Passer til: Dyna 06-17
OEM-nr.: 24004-03B
| Material | Steel |
| Produkt-typ | Flywheel Assembly |
| Tillverkarens Art. Nr. | 320-0352 |
| OEM-nr | 23729-07B |
Replacement Flywheel Assembly
- S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
- Fits directly in stock crankcases with no modifications
- Made in the U.S.A.
- Flywheel assembly without sprocket bearing race are designed for use with Timken bearing conversion (sold separately).
- 06-17 4-3/8" stroke flywheel assembly. For OEM
- OEM compatible
- Stock 96", 103", 110" stroke is 4-3/8"
- These S&S conrods have a (non Timken) pressed-on sprocket shaft roller bearing race for use with the stock 24004-03B sprocket shaft bearing, a weaker solution but compatible with OEM components
- Complete with tapered wrist pin ends that are compatible with stock H-D pistons
- Balanced to 1035 grams total piston weight, which is compatible with OEM
- Note: Engines with strokes exceeding 4" may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact
- Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods
- The first generation of S&S crankpins, in use up to 2012, were 1.500" diameter
- Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available
- Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
- It is of importance that a knowledgeable mechanic will install & make adjustments as required
Fits: 06-17 Dyna; 07-16 FLT/Touring. With OEM 96", 103"or 110 pistons & OEM sprocket shaft bearing (NU)