Svinghjul S&S 4-3/8" Dyna 06-17
Komplet svinghjul med plejlstænger fra S&S
Læs mere
- Slaglængde: 4-3/8"
- Komplet monteret med kraftige 7.659" S&S-plejlstænger og dynamisk afbalanceret
- Afbalanceret til en samlet stempelvægt på 1035 gram
- CNC-bearbejdet af varmebehandlet, smedet stål – 114 % stærkere end sene originale svinghjul i stål
- Rettet til mindre end .0005" rundløb på lagerflader for pinjonaksel og drevaksel
- Kompatibelt med tandhjulsdrevne knastaksler og kan klare højere omdrejningstal
- Pinjonaksel og drevaksel er smedet direkte som en del af svinghjulet
- Fremstillet i USA
Til 96", 103", 106" big bore samt 110" og 117" motorer. Kræver S&S-stempler, da plejlstængerne ikke er koniske ved stempelbolten og dermed ikke er kompatible med originale stempler. Konstrueret til Timken-lejer på drevakslen, passer til original krumtaphus 99–02 og alle S&S-krumtaphuse uden modifikation, men kræver konvertering til Timken-lejer på 03–17 modeller.
Passer til: Dyna 06-17
OEM-nr.: 24004-03B, 24605-07
| Material | Steel |
| Produkt-typ | Flywheel Assembly |
| Tillverkarens Art. Nr. | 320-0351 |
Replacement Flywheel Assembly
- For 96"/103"/106" big bore | 110"/117" engine with stock or S&S pistons (will be noted)
- Fully assembled with premium quaility S&S heavy duty 7.659" connecting rods, with full width wrist pin ends, and dynamically balanced
- Trued to less than .0005" runout on pinion and sprocket shaft bearing surfaces, making them capable of higher rpm and fully compatible with gear drive cams
- CNC machined from heat-treated, closed die, steel forgings, which are 114% stronger than late style stock steel flywheels
- The only joints in the assembly are where the 1.671" diameter connecting rod crankpin is pressed into the flywheels
- Pinion and sprocket shafts are forged as part of the flywheel
- Made in the USA
- 06-17 4-3/8" stroke flywheel assembly
- S&S conrods do not have tapered wristpin ends and are not compatible with stock H-D pistons or stock H-D sprocket shaft bearings
- Balanced to 1035 grams total piston weight
- Note: Engines with strokes exceeding 4" may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact
- Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods
- The first generation of S&S crankpins, in use up to 2012, were 1.500" diameter
- The second generation crankpins, in use since 2013, have the larger 1.671" OEM diameter crankpins
- Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available
- Note: Following is regarding 03-17 models
- S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications
- Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution
- However, S&S feels this roller bearing will not take the side loads produced in a high performance motor
- S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used
- To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available
- Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
- It is of importance that a knowledgeable mechanic will install & make adjustments as required
Requires S&S pistons.
Fits: 06-17 Dyna; 07-16 FLT/Touring (NU)