Svinghjul S&S 4-5/8" Softail 00-06

20 976 DKK

S&S tredelt svinghjul med plejlstænger til 116" og 124" motorer
Læs mere

09220159 S&S
  • Tredelt konstruktion med integrerede aksler fremstillet i 4140-stål
  • Slaglængde: 4-5/8"
  • Krumtap med 1,671" diameter og udskiftelige lejebaner i plejlstængerne
  • Afbalanceret til en samlet stempelvægt på 1035 gram
  • Passer direkte i originalt krumtaphus uden modifikation
  • Uden kædehjulslejebane, tilpasset til Timken-lejekonvertering
  • Plejlstængerne har ikke koniske lilleender
  • Fremstillet i USA

Til 116" og 124" S&S-motorer. Plejlstængerne er ikke kompatible med H-D originale stempler eller original kædehjulsaksellejer. Til motorer med slaglængde over 4" kan S&S stempeloliedyser og udskæringer i stempelskørtet være påkrævet. Til 03–17 Twin Cam kræves konvertering til Timken-leje (sælges separat), da rullelejet af originaltype ikke godkendes af S&S til garanti.

Passer til: Softail 00-06

OEM-nr.: 24004-03B, 24605-07

Produkt-typ Flywheel Assembly
Tillverkarens Art. Nr. 320-0469

Replacement Flywheel Assembly

  • S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
  • Fits directly in stock crankcases with no modifications
  • Made in the U.S.A.
  • Flywheel assembly without sprocket bearing race are designed for use with Timken bearing conversion (sold separately).
  • 00-06 Softail 4-5/8" stroke flywheel assembly
  • For 116/124 S&S engines
  • S&S conrods do not have tapered wristpin ends and are not compatible with stock H-D pistons or stock H-D sprocket shaft bearings
  • Balanced to 1035 grams total piston weight
  • Note: Engines with strokes exceeding 4" may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact
  • Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods
  • The first generation of S&S crankpins, in use up to 2012, were 1.500" diameter
  • Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available
  • Note: Following is regarding 03-17 models
  • S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications
  • Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution
  • However, S&S feels this roller bearing will not take the side loads produced in a high performance motor
  • S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used
  • To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available
  • Bearing inserts only are available as 978519, bearings only as 508960
  • Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
  • It is of importance that a knowledgeable mechanic will install & make adjustments as required
  • Note: Special Order Product only
  • To order please contact your MCS sales representative

Fits: 00-06 Softail (NU)