Krumtaphus S&S 3-5/8" natur Evo Big Twin med 3-5/8" big
S&S Superstock krumtaphus med 3-5/8" cylinderboring i naturfinish
Læs mere
- Fremstillet af 356-T6 aluminium for væsentligt højere styrke end original
- Egnet til både standarderstatning og racingapplikationer
- Leveres med monterede Timken-hovedlejebaner til drevaksel og knastnåleleje
- Indpresset og linjehonet lejebane til pinjonaksel
- Optimeret olieudsugning via portet krumtaphusventilation
- Udfræset frigang til slaglængde op til og med 5"
- Svinghjulsskraber tilpasset svinghjul med 8-1/2" originaldiameter
- Inkluderer Timken-leje til drevaksel, tapbolte, fornikkelede krumtaphusbolte, nipler, olietryksføler, tændingsindstillingsprop, magnetisk aftapningsprop og statorklemskrue
Til 84-E85 Evo Big Twin-modeller skal der bruges et L85-91 topstykke boltsæt (sælges separat som MCS 505266 eller 989599). Original oliepumpe i aluminium (70-91) eller S&S oliepumpe (MCS 519923) kan bruges.
Passer til: Evo Big Twin med 3-5/8" big
OEM-nr.: 26190-73
84-91 crankcase assembly, 3-5/8" bore. Natural
- S&S Superstock crankcases, made from 356-T6 aluminum, are much stronger than the OEM case
- OEM cases can/may break in high performance or even stock applications, like more than a few of us found out the hard way
- These S&S Superstock cases can be used for both stock replacement and racing applications
- Important to the engine builder are the substantial savings in labor when using S&S cases
- These cases come 'set up' with sprocket shaft Timken main bearing races and cam needle bearings installed and pinion shaft main bearing race pressed in and line-honed
- Additional parts that are supplied include Timken sprocket shaft bearings, cylinder studs, nickel plated case bolts, crankcase fittings, oil pressure sensor, timing & magnetic crankcase drain plugs and a special S&S design alternator stator plug clamp screw
- The flywheel scrapers are machined to match the original 8-1/2" diameter flywheels
- S&S cases maximize crankcase oil scavenging efficiency by using a 'ported' design breather passageway
- S&S cases are clearanced up to and including 5", no additional clearancing for strokers will be necessary
- Note: For 84-E85 Evo Big Twin models you must use a L85-91 style cylinder head bolt kit
- These can be ordered separately as MCS 505266 (Gardner-Westcott) or 989599 (Colony) in standard lengths only
- Note: The aluminum H-D oil pump, (26190-73) or the S&S oil pump, MCS 519923, can be used in 70-91 applications
- Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
- It is of importance that a knowledgeable mechanic will install & make adjustments as required
Fits: 84-91 Evo Big Twin with 3-5/8" big bore (NU)