Krumtaphus S&S 3-5/8" sort Evo Big Twin med 3-5/8" big
S&S Superstock krumtaphus med 3-5/8" cylinderboring i sort finish.
Læs mere
- Fremstillet af 356-T6 aluminium med betydeligt højere styrke end originalen
- Egnet til både standarderstatning og racinganvendelser
- Leveres med Timken-lejeringe til krumtapaksel og knastnållejer installeret
- Hovedlejebane til pinjonaksel er indpresset og linjehonet (line-honed)
- Frigang (clearance) op til og med 5" slaglængde uden ekstra bearbejdning
- Svinghjulsskraber bearbejdet til svinghjul med 8-1/2" originaldiameter
- Optimeret krumtaphusventilation med portet kanal for mere effektiv olietilbageføring
- Inkluderer Timken-drivaksellejer, gevindbolte, fornikklede bolte, koblinger, olietrykssensor, propper og statorklemskrue
For 92–99 krumtaphuse skal der anvendes oliepumpe af 92–99-model (OEM eller S&S MCS 519924). Montering og kontrol af komponenters kompatibilitet skal udføres af en kyndig mekaniker.
Passer til: Evo Big Twin med 3-5/8" big
OEM-nr.: 26053-92
92-99 crankcase assembly, 3-5/8" bore. Black
- S&S Superstock crankcases, made from 356-T6 aluminum, are much stronger than the OEM case
- OEM cases can/may break in high performance or even stock applications, like more than a few of us found out the hard way
- These S&S Superstock cases can be used for both stock replacement and racing applications
- Important to the engine builder are the substantial savings in labor when using S&S cases
- These cases come 'set up' with sprocket shaft Timken main bearing races and cam needle bearings installed and pinion shaft main bearing race pressed in and line-honed
- Additional parts that are supplied include Timken sprocket shaft bearings, cylinder studs, nickel plated case bolts, crankcase fittings, oil pressure sensor, timing & magnetic crankcase drain plugs and a special S&S design alternator stator plug clamp screw
- The flywheel scrapers are machined to match the original 8-1/2" diameter flywheels
- S&S cases maximize crankcase oil scavenging efficiency by using a 'ported' design breather passageway
- S&S cases are clearanced up to and including 5", no additional clearancing for strokers will be necessary
- Note: For 92-99 crankcases a 92-99 OEM (26053-92) or S&S (MCS 519924) oil pump must be used
- Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
- It is of importance that a knowledgeable mechanic will install & make adjustments as required
Fits: 92-99 Evo Big Twin with 3-5/8" big bore (NU)