Kamplatta Feuling High Flow M8 H-D 17-upp
Feuling High Flow kamplatta i 7075 fräst aluminium
Lue lisää
- Konstruktion i 7075 fräst aluminium som är 50 % hårdare och starkare än fabriksgjutna och Feuling OE+-kamplattor
- Ökar motorns oljeflöde och volym genom förstorade oljepumpsreservoarer och kritiska oljekanaler
- Matchar oljeportarna mot motorblocket för optimerat oljeflöde i hela motorn
- Bibehåller snävare toleranser vid höga temperaturer och eliminerar flex samt behovet av bronsbussningar
- Sänker motortemperaturen med 15–25 grader och oljetemperaturen med 15°–25° i kombination med Feuling HP+ eller RS oljepump
- Ger effektökningar på upp till 2 hästkrafter och 2 ft. lb. i vridmoment på bakhjulet tillsammans med Feuling Race Series oljepump
- För kamaxlar med kugg- eller kedjedrivning
- Tillverkad i USA
Används endast tillsammans med Feuling HP+ och Race Series M-Eight oljepumpar. Vid användning med kuggdrivna kamaxlar krävs täckplatta (PART #0932-0036 / 566113).
Passar: H-D 17-upp
| Färg | Red |
| Produkt-typ | Cam Plate |
| Tillverkarens Art. Nr. | 8017 |
High Flow Camplate
- Increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including the scavenging return holes from the pump to the camplate and into the engine case
- Camplate matches the oil port holes on the camplate to the oil holes in the engine case to increase oil flow throughout the engine
- Lowers engine temperatures by 15-25 degrees and oil running temperature by 15°-25° when matched with a Feuling HP+ or RS oil pump
- 7075 billet aluminum construction, which is 50% harder and stronger than the factory cast and Feuling OE+ camplates
- Increases the strength and hardness of the camplate, holding tighter tolerances under temperature and eliminating flexing and the need for bronze bushings
- When matched with the Feuling Race Series Oil Pump, rear wheel power gains of 2 horsepower and 2 ft. lb. of torque can be achieved
- Made in the USA
- For gear or chain drive cams (block-off plate PART #0932-0036 required when using gear drive cams).
- Use Only with Feuling HP+ and Race Series M-Eight oil pumps.
- Note: Gear drive cam requires the use of 566113 block-off plate
Fits: 18-25 Softail; 17-25 Touring. With Feuling HP+ & Race Series oil pump