Kamaxel Feuling Parts Reaper 508 H-D 17-upp
Feuling Reaper 508 kedjedriven kamaxel för M8
Lue lisää
- Reaper 508 kamslipning för kedjedriven drivning i M8-motorer
- Varvtalsområde: 2 250–5 900 rpm
- Prestanda: Ger mer hästkrafter och vridmoment i körbart varvtalsområde samt förbättrad gasrespons och acceleration
- Släta lobramper minskar slitage och oljud i ventilsystemet
- Lyft ventillyft TDC: .180"/.98.5"
- Duration insug/avgas: 237°/241,5°, överlapp: 38°
- Insugsventil öppnar/stänger: 20,5°/37°
- Tillverkad i USA
Utvecklad för 114" (1,87 L) och större motorer med högre kompressionsförhållande. Ventilfjädrar för högt lyft krävs (kompatibel med SE-topplock som har detta som standard). Feuling rekommenderar starkt stötstänger i en del (kraftiga) framför justerbara stötstänger, samt högflödes luftfilter och avgassystem. Passar inte '23-'24-modeller med 121"-motorer.
Passar: H-D 17-upp
| Produkt-typ | Cam |
| Tillverkarens Art. Nr. | 1349 |
Reaper 508 Cam
- Produce more power and torque in the riding RPM range, improving throttle response, acceleration and fuel mileage
- Smooth camshaft lobe ramps are easier on valvetrain components and eliminate excessive valvetrain noise and wear
- Dyno proven and track tested
- The Grim Reaper aggressive pulling power with a nasty sound
- This camshaft revs up faster than the 521 grind, sounds nastier and pulls harder, but is more difficult to tune
- The Reaper 508 grind will shine in 114" and larger cubic inch engines with added compression ratio
- Ported cylinder heads are not required, but will complement the cam and add even more pulling power throughout the range
- The stock throttle body produces an excellent powerband and use of a high flow throttle body will increase peak power numbers
- A high-flow exhaust system and air cleaner is highly recommended for optimal performance
- High-lift valve springs are required
- Heavy-duty pushrods are highly recommended
- 2250 - 5900 rpm range
- Made in the USA
- Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
- EU: The Reaper 508 grind will shine in 1,87 L and larger cubic inch engines with added compression ratio
- Due to the unstable nature of this 4-valve engine design with one rocker arm activating two valve springs, Feuling highly recommends running one-piece pushrods over quick-install adjustable pushrods to maintain maximum cam/ valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues.
- Reaper M8 chain drive 508 Camshaft
- Intake open/close: 20.5/37
- Duration in/ex: 237/241.5
- Valve lift TDC: .180"/.98.5"
- Overlap 38
- RPM range 2.250-5.900
- Note: Compatible with SE heads since these are equipped with high lift springs as standard
Not for '23-'24 models with 121" motors.
Fits: 18-26 Softail; 17-26 FLT/Touring (excl. 23-26 VVT); 17-26 Trikes