Drev vevhusventilation S&S stål Evo Big Twin H-D 77-99
Roterande ventil och drev för vevhusventilation i stål från S&S
Lue lisää
- Konstruktion helt i stål
- Svetsad nätsil
- Högre flöde än original
- Förlängt evakueringshål för ökat sug och förbättrad oljeretursugning
- Standardstorlek (STD)
- Fungerar som ersättning för original eller i högprestandamotorer
Stålventiler kräver distanser i stål, blanda inte stål- och plastdelar. Finns även i .030" överstorlek (artikelnr 518662) för att rädda slitna eller skadade vevhus. Den ändrade timingen och det förlängda hålet förbättrar oljeevakueringen från topplock och vevhus, särskilt i högprestandamotorer och motorer med stor cylindervolym.
Passar: H-D 77-99
OEM-nr: 25313-77A
| Material | Steel |
| Produkt-typ | Gear |
| Tillverkarens Art. Nr. | 33-4241 |
| OEM-nr | 25313-77C |
Steel Rotary Breather Gear
- All-steel construction
- Welded-in screen
- Higher flow than stock
- Elongated breather pocket scavenge hole for increased suction
- Steel breather valve. STD
- High quality steel breather valve for use as stock or high performance replacement
- Note: S&S breather valves come with elongated breather holes to increase the duration of the vacuum, allowing more oil to be drawn from the cylinder heads
- This has no disadvantage in any model year, either stock or Big Inch motor
- Note: that steel breathers require steel breather valve spacers
- Plastic breathers require plastic spacers
- Do not intermix steel and plastic parts
- Note: A .030" oversize breather is available to save worn or damaged crankcases as 518662
- A JIMS breather hole reamer (MCS 978343) will ream the damaged hole to +.030" so a +.030" breather can be used
- Tech tip: The timing for S&S breather valves, only for late 77-84 Shovel and 84-99 Evo Big Twin models, has been changed by S&S in the year 2000
- This is done to improve oil scavenging and reduce oil carry-over in high performance / large displacement engines
- Old opening was at TDC and closing at 65° after BDC
- The old timing specification can be obtained by installing the timing mark on the breather gear one tooth clockwise from the timing mark on the cam gear
- Also the breather's cavity oil evacuation hole (opposite of the drive gear), which used to be a round hole, has been elongated (made longer) to increase the duration of suction to the crankcase breather 'settling' cavity
- The new specifications are not useful in most stock engines, but harmless
- Breather windows in S&S cases will typically open at 7° after TDC and close 92° after BDC
- Builders using other crankcases may modify crankcase breather opening to obtain these specifications for maximum breather efficiency and performance
Fits: L77-99 Big Twin (Excl. TC)