Framgaffel Drag Specialties 2 svart H-D 84-14 MU35218
Komplett monterad custom springer framgaffel i standardlängd
Läs mer
- Prisvärt alternativ till stötdämparförsedda springer-framgafflar
- Levereras komplett monterad med in-line övre krona utan inbyggd rake
- Standardlängd på 31" mätt från övre lagret till hjulaxeln (motsvarar standardlängd på FXST)
- Mäts från undersidan av den övre gaffelkronan till mitten av hjulaxeln
- 1" ytterdiameter på styrstam, anpassad för Timken-lager
- Båda bakre benen är gängade för montering av höger- eller vänsterbroms
- Mått mellan rockers är 9-1/4"
- Risermontering med 4-3/4" centrummått och 1/2"-20 gänga
Satsen innehåller hjulaxel med 3/4" ytterdiameter, bromsfästestapp med tryckbricka samt navdistanser (anpassade distanser kan krävas beroende på vilket hjul som används). Kräver hjul som är kompatibelt med 3/4" hjulaxel. Passar inte med extraljusfästen (spotlight bars) och saknar skärmfästen.
Passar: H-D 84-14
| Färg | Black |
| Produkt-typ | Fork Assembly |
| Storlek | Lifts 50,80 mm (2,00 tum) |
| Tillverkarens Art. Nr. | MU35218 |
Custom Springer Forks
- Economical alternative to a shock dampened-type Springer
- Fully assembled with an in-line top bracket without a built-in rake
- The standard length Springer (31" measured from top bearing to the axle) is comparable to a standard-length FXST front end
- 1" O.D. steering stem designed for Timken type bearings
- Both rear legs are threaded for right or left brakes
- The 3/4" O.D. axle kit includes a brake mount pivot with thrust washer and hub spacers (custom spacers may be required depending on the wheel used)
- Measures 9-1/4" between Rockers
- Riser mounts are on 4-3/4" centers and threaded 1/2"-20
- Requires wheel compatible with 3/4" O.D. axle
- These Springers are measured from the bottom of the top tree to the center of the axle
- Springers do not accept spotlight bars; no fender mounts.
The standard length Springer (31" measured from top bearing to the axle) is comparable to a standard-length FXST front end.