Kolvringssats Hastings 2.745 45" 29-49
Hastings kolvringssats STD för 2.745" cylinderborr
Läs mer
- Cylinderborr standard: 2.745" (69.72mm)
- Kompressions- och oljeringar i fosfaterat (parkerized) grått gjutjärn
- För tidig kolvtyp (1929–1949) med oljering i ett stycke i gjutjärn
- Första ring: 2.3mm (3/32")
- Oljering: 3.2mm (1/8")
Passar inte kolvar av den senare typen från 1950–1973. Mät kolvringspårens höjd i kolven för att säkerställa passform.
Passar: 45" 29-49
2.745" bore piston ring set. STD
- Comes with parkerized cast gray iron compression and oil rings
- Used with early style 1929-1949 type pistons with the one-piece cast iron oil ring
- Std cyl. bore: 2.745" (69.72mm)
- 1st ring: 2.3mm (3/32)
- Oil ring: 3.2mm (1/8")
- Note: OEM 1950-1973 pistons are equipped with 1/16" (1.6mm) 1st. & 2nd rings and late style 3/16" (4.75mm) 3-piece flex-vent style oil rings for improved oil control, for these Hastings rings see 1950-1973 Flathead model years
- Above mentioned rings will not fit the 1950-1973 new type pistons
- Tech tip: Piston grooves vs piston rings
- It's not difficult to determine if a Hastings piston ring set will fit a certain piston
- You should measure the height of the piston groove in the piston itself
- Ring heights are listed for reference
- For each oversize cylinder diameter will increase with .010" (0.254mm)
- The standard bore of the cylinder is listed for reference. (Tech tip information provided by Hastings Manufacturing Company, Inc.)
Fits: 29-49 45" (750cc) Flathead (NU)