Oljesticka Feuling M8 Softail 18-24

4 840 kr

Feuling ventilerad oljesticka med vevhusventilationssats för oljetank
Läs mer

07100262 Feuling
  • Ventilerar vevhustryck från oljetanken via ett PCV-system med oljeavskiljare, perforerad skiva, utbytbar filterinsats och paraplyventil
  • Gängas direkt i originalets oljepåfyllningsrör som en ersättning
  • Minskar tryckuppbyggnad och blow-by, sänker sumpnivån och förhindrar att oljestickan trycks ut
  • Mät oljenivån antingen på sidostödet (FHS) eller med motorcykeln upprätt (FHU)
  • Polerat lock i rostfritt stål
  • Två valbara ventilationstyper ingår: 1/8" NPT-anslutning med invändig filterinsats eller snabbkoppling med slang och filter
  • Levereras komplett med ventilerad oljesticka, filter, flätad klar PVC-slang och packningar där det behövs
  • Tillverkad i USA

Oljestickan blir varm under körning – använd handske vid kontroll. Feuling rekommenderar att hålla oljenivån på 90–99 % vid varm motor samt att använda konventionell olja i M8-motorer för bästa kolvringstätning.

Passar: M8 Softail 18-24

Färg Black
Material Aluminum
Produkt-typ Oil Dipstick
Tillverkarens Art. Nr. 3086
Färg Polished
Tillverkarens Art. Nr. 3085

Vented Dipstick

  • Billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve
  • Screws into the factory oil fill spout as a stock replacement part
  • Blowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank
  • Fueling test results show a decrease in engine oil sump levels, more freely/smoothe revving engine and increased MPG and decreased blowby
  • Removes unwanted build-up of blow by pressure in the oil tank
  • There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright
  • Includes 2 different venting style options for installing the dipstick: option 1 - 1/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element
  • It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot
  • The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank
  • Made in the USA
  • This dipstick does get hot, use a glove when checking oil level.
  • Oil tank breather kit & vented dipstick. Black cap
  • Comes as complete kit with vented dipstick, filter, braided clear PVC covered line
  • M8 Softail models have the oil tank mounted under the transmission
  • The engine, with two massive pistons going up and down, breathes in to the oil tank
  • This system is a way to vent the oil tank to help reduce pressure build-up and reduce power robbing pressures and stops dipstick blow-out
  • Note: Gaskets are supplied where required

Feuling highly recommends staying off the rev limiter and running conventional oil in the M8 engines to help maintain ring seal and minimize blowby.

Fits: 18-24 M8 Softail (NU)