Tænding Dynatek 2000I Programmable 2X Twin-fire H-D 70-03

4 740,3 DKK

Dynatek programmerbart elektronisk tændingskit med tændspole
Læs mere

21010031 Dynatek
  • Komplet kit med 2000i-tændingsmodul og en Dynatek 3 ohm Twin-Fire II single-fire tændspole
  • Monteres helt inden i knastdækslet for et rent udseende
  • Fungerer i single-fire og dual-fire med enkelt eller dobbelt tændrør per topstykke
  • Ti forindstillede tændingskurver samt justerbar omdrejningsbegrænser fra 6000 til 7500 rpm
  • Justerbar tændingsretard til lattergas- og turboapplikationer samt VOES-indikator
  • Indbygget beskyttelse mod overstrøm, kortslutning og overspændingsspidser samt aktiv dwell control
  • Datalogning gemmer driftstid, fuldgasdata, maks. omdrejninger og antal starter
  • Fuldt PC-programmerbar til tilpassede tændingskurver, omdrejningsgrænser og cylinderoffset
  • Fremstillet i USA

Passer ikke til modeller med brændstofindsprøjtning og er ikke kompatibel med kickstart. Støjdæmpede tændkabler af kulfiber-, grafit- eller spiralkernetype er påkrævet. Tændingsrotor medfølger ikke, genbrug originalen eller supplér med 920402 rotor- og boltsæt. Programmeringskit sælges separat, men er ikke nødvendigt til grundlæggende funktioner.

Passer til: H-D 70-03

OEM-nr.: 32402-83

Produkt-typ Ignition Kit
Tillverkarens Art. Nr. D2KI-5P

2000I PC Programmable Electronic Ignition Kit

  • Completely self-contained so entire unit hides under the cam cover for a clean look on custom bikes
  • Single-fire operation down to zero rpm for easier cranking and kicking
  • Will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads
  • Ten advance curves cover a broad range of engine builds and riding styles
  • Engine over-rev protection, adjustable from 6000 to 7500 rpm
  • Adjustable timing retard for nitrous and turbo applications
  • VOES indicator lets you monitor VOES switch at a glance
  • Built-in tach driver can be used to activate shift lights, auto-shifters and other accessories
  • Easy static timing with built-in timing indicator
  • Intelligent over-current/short-circuit protection
  • Active dwell control
  • Over-voltage protected against momentary spikes
  • Data recording includes total engine hours, time wide-open throttle, longest time operating at wide-open throttle, max rpm, seconds near rev limit and number of engine starts
  • PC programmability makes possible an eight-point, fully definable, wide-open throttle curve and a fully definable part throttle curve, rev limit programmable in 50 rpm steps, programmable dead-cranking revs 0-5, rear cylinder offset, total of +/- 10°, programmable rev limiter, security lock out (pin # activated), single or dual fire
  • Programming and downloading data and graphs from module requires proper programming kit (includes CD, cables and instructions)
  • Pigtail connector enables the user to connect the ignition to a PC to either download recorded info from the ignition or program their own power curves, rev limits, dead revs or rear cylinder off-set timing; connector remains on bike
  • Made in the USA
  • Not for fuel-injected models
  • Programming kit is not necessary to use all selectable functions of the current ignition.
  • Dyna 2000i ignition module & 1 coil kit
  • 2000i ignition module, complete with one Dynatek 3 ohm Twin-Fire II single fire coil
  • The module is simply adjustable with switches, nothing else required. features include an intelligent overvoltage/overcurrent protection, a short circuit protection and an adjustable retard timing
  • But if you want more... it is fully programmable with the, optional available, programming kit (902528) and harness (902524)
  • Another new feature is data recording
  • The module records a series of data and stores it
  • The recorded data can be downloded with a PC to show engine builders how the engine was used (or abused), should there be a problem in the future
  • Note: It is recommended to use ignition modules & coils of the same manufacturer
  • Intermixing different brands may cause premature failure
  • Coil must be within range of 2.5 to 3.5 ohms
  • Carbon, graphite or spiral core type suppression spark plug wires are required
  • Note: Dyna does not offer the ignition rotor
  • The OEM Harley rotor (OEM 32402-83) and mounting bolt (OEM 2611B) should be re-used or ordered separately as 920402 rotor & bolt kit
  • Note: Not compatible with kickstart models

Fits: 70-99 Big Twin (Excl. Twin Cam) and 71-03 XL Sportster (NU)