Knastakselsæt Feuling 521 M8 oil cooled, chain Drive 17-26
Feuling Race Series knastakselsæt til oliekølede motorer
Læs mere
- Indeholder Reaper 521-knastaksel (993525) til motorer på 114" og større med øget kompressionsforhold
- Race Series oliesystem med oliepumpe og knastplade i billet 7075-aluminium samt Race Series hydrauliske ventilløftere
- Oliepumpen har magneter til beskyttelse og er 50 % hårdere og stærkere end originalpumpen
- 27 % mere tryk- og returvolumen samt 42 % mere returvolumen gennem matchede porte og kanaler
- 46 % mere oliemængde til krumtapaksel- og plejlstangslejer samt 10–30 PSI højere olietryk
- Sænker motortemperaturen med 15–25 grader og reducerer oliestanden i krumtaphuset med 50 %
- Løfterne har .200" samlet slaglængde og tilpasset frigang til den forreste udstødningsknasts flange
- Inkluderer stødstænger med fast længde, Timken/Koyo-knastlejer, vippearmsbolte, pakninger, O-ringe og ARP-fastgørelseselementer
Til oliekølede Milwaukee-Eight. Kræver ventilfjedre til højere løft på originale topstykker (f.eks. Feuling Beehive 993530). Overfyld ikke olietanken, kontrollér niveauet, når motoren er varm og motorcyklen står oprejst.
Passer til: M8 oliekølede, kædedrift 17-26
| Produkt-typ | Camchest Kit |
| Tillverkarens Art. Nr. | 7262 |
Race Series 521 cam chest Kit, Oil cooled M8
- With Reaper 521 (993525) cam shaft
- FEULING M8 OIL COOLED cam chest kits include all necessary components from top to bottom of the cam chest conveniently packaged under 1 part number
- These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony
- These cam chest kits take the guess work out of the ordering process and guarantees the engine builder maximum reliability, peak performance and the coolest engine and oil temperatures obtainable
- Quieter and smoother engine operation
- Increase oil pressure, scavenge volume and engine oil flow
- 27% more pressure and scavenge gear volume over stock
- 42% more scavenge volume with port sizing, matched passages and holes to the engine case
- 46% more oil volume to the crankshaft and connecting rod bearing
- 15-25 degree cooler engine temperatures
- 10-30 more PSI of oil pressure
- Reduces wet sumping, blow by and oily air cleaners
- Magnets in oil pump to help protect gears and pressure relief valve
- Test results show 2 HP gain and 2 ft/lbs. of TQ gain to the rear wheel on Milwaukee Eight
- NOTE: Feuling's test results show a 50% reduction of engine sump oil level
- Aggressive pulling power with a "nasty" sound, the REAPER 521 grind will shine in 114" and larger cubic inch engines with added compression ratio
- Ported cylinder heads are not required but will complement the cam and add even more pulling power throughout the range
- The stock throttle body produces an excellent powerband and use of a high flow throttle body will increase peak power numbers
- A high flow exhaust system and air cleaner is highly recommended for optimal performance
- NOTE: High Lift valve springs are required on stock cylinder heads, see Feuling's Beehive valve spring kit 993530
- Due to the mass call volume & inquires with requests for the M8 oil pump back cover O-ring/seal groove, Feuling has added the groove (5/11/21)
- Although Feuling's in house testing on healthy engines did not show a benefit
- The O-ring may have potential benefits in certain circumstances such as engines with higher cylinder leak down, poor sub-seal O-ring seal, raised sump hole & or sump plug & looser lifter to lifter bore clearances
- Kits include: Feuling's high volume Oil pump, HIGH FLOW billet Cam plate, Reaper Series Camshaft, hydraulic roller lifters, fixed length pushrods, Timken/Koyo cam bearing, rocker arm studs and nuts, gaskets, O-rings, ARP cam/crank fasteners, washers, moly lube and Loctite. -Race Series kits include a Race Series oiling system: billet 7075 oil pump, Race Series lifters, high flow billet 7075 aluminum cam plate
- Billet 7075 aluminum oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature, deeper scavenge kidneys over HP+ oil pump
- Race Series hydraulic lifters have a full .200" of total travel designed with a slower bleed down rate to handle heavy valve spring pressures, increase engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the M8 front exhaust camshaft lobe flange
- DO NOT OVERFILL OIL TANK It is important to get the correct hot oil level in your bike
- Feuling recommends running the oil level 90%-99% full when hot
- Note: The M8 oil pick up port is on the right side of the engine
- Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank
- Feuling recommends the following steps to achieve proper oil level: 1
- Check cold oil level
- Ride the bike until operating temperature is reached
- 3
- Shut the bike off while still in the upright position. (This insures an accurate reading) 4
- Add or remove oil as needed
- Feuling does not recommend tuning beyond stock emissions standards
Fits: 17-26 M8 oil cooled, chain Drive (excl. VVT models)