Oliepind ventileret med ventilationssæt olietank Feuling poleret låg M8 Touring 17-26

3 339,6 DKK

Ventileret oliepind i billet-udførelse med krumtaphusventilationssæt
Læs mere

07100259 Feuling
  • Fremstillet i USA
  • Skrues direkte i det originale påfyldningsrør som erstatning for den originale oliepind
  • Poleret rustfri top
  • Ventilerer overtryk og blow-by fra olietanken via et PCV-system med olieudskiller, perforeret skive, udskiftelig filterindsats og paraplyventil
  • To medfølgende valg af ventilationstype: 1/8 NPT-nippel med indvendig porøs filterindsats, eller lynkobling med slange og filterindsats
  • Leveres komplet med ventileret oliepind, filter, klar PVC-overtrukket flettet slange samt nødvendige pakninger
  • Målemarkeringer til aflæsning både på sidestøtten (FHS) og i oprejst stilling (FHU)

Oliepinden bliver meget varm under kørsel, brug handsker ved kontrol af olieniveauet. Feuling anbefaler at holde olieniveauet på 90%–99%, når motoren er varm, samt at bruge konventionel olie i M8-motorer for bedste ringtætning.

Passer til: M8 Touring 17-26

Material Aluminum
Färg Chrome
Produkt-typ Oil Dipstick
Modell FLFB 1750 ABS,FLFBS 1868 ABS
Tillverkarens Art. Nr. 3087

Vented Dipstick

  • Billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve
  • Screws into the factory oil fill spout as a stock replacement part
  • Blowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank
  • Fueling test results show a decrease in engine oil sump levels, more freely/smoothe revving engine and increased MPG and decreased blowby
  • Removes unwanted build-up of blow by pressure in the oil tank
  • There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright
  • Includes 2 different venting style options for installing the dipstick: option 1 - 1/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element
  • It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot
  • The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank
  • Made in the USA
  • This dipstick does get hot, use a glove when checking oil level.
  • Oil tank breather kit & vented dipstick. Pol. cap
  • Polished stainless cap
  • Comes as complete kit with vented dipstick, filter, braided clear PVC covered line
  • Touring models have the oil tank mounted under the transmission
  • The engine, with two massive pistons going up and down, breathes in to the oil tank
  • This system is a way to vent the oil tank to help reduce pressure build-up and reduce power robbing pressures and stops dipstick blow-out
  • Note: Gaskets are supplied where required

Feuling highly recommends staying off the rev limiter and running conventional oil in the M8 engines to help maintain ring seal and minimize blowby.

Fits: 17-26 M8 Touring