Oliestandmåler ventileret med udluftningssæt olietank Feuling poleret låg Dyna 06-17

3 339,6 DKK

Ventileret oliestandmåler fra Feuling med poleret låg
Læs mere

07100264 Feuling
  • Ventilerer overtryk fra krumtaphuset via olietanken
  • Skrues direkte i den originale oliepåfyldningsstuds som erstatning
  • PCV-ventilation med olieseparator, perforeret skive, udskiftelig filterindsats og paraplyventil
  • Reducerer oliestanden i sumpen, sænker blowby og giver en motor, der tager gassen lettere
  • To aflæsningsmuligheder ved varm motor: på sidestøttebenet (FHS) eller oprejst (FHU)
  • To medfølgende udluftningsmuligheder: 1/8" NPT med indvendig filterindsats eller lynkobling med slange og filter
  • Komplet sæt med ventileret oliestandmåler, filter, flettet klar PVC-slange samt pakninger, hvor det kræves
  • Fremstillet i USA med låg i poleret rustfrit stål

Feuling anbefaler en oliestand på 90–99 % ved varm motor. Oliestandmåleren bliver varm under kørsel, brug handsker ved kontrol af oliestanden.

Passer til: Dyna 06-17

Färg Black
Material Aluminum
Produkt-typ Oil Dipstick
Tillverkarens Art. Nr. 3090
Färg Polished
Tillverkarens Art. Nr. 3089

Vented Dipstick

  • Billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve
  • Screws into the factory oil fill spout as a stock replacement part
  • Blowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank
  • Fueling test results show a decrease in engine oil sump levels, more freely/smoothe revving engine and increased MPG and decreased blowby
  • Removes unwanted build-up of blow by pressure in the oil tank
  • There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright
  • Includes 2 different venting style options for installing the dipstick: option 1 - 1/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element
  • It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot
  • The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank
  • Made in the USA
  • This dipstick does get hot, use a glove when checking oil level.
  • Oil tank breather kit & vented dipstick. Black cap
  • Comes as complete kit with vented dipstick, filter, braided clear PVC covered line
  • Dyna models have the oil tank mounted under the transmission
  • The engine, with two massive pistons going up and down, breathes in to the oil tank
  • This system is a way to vent the oil tank to help reduce pressure build-up and reduce power robbing pressures and stops dipstick blow-out
  • Note: Gaskets are supplied where required

Fits: 06-17 Dyna (NU)