Oliestandmåler ventileret med udluftningssæt olietank Feuling poleret låg Touring 07-16

3 339,6 DKK

Ventileret oliestandmåler fra Feuling med poleret låg
Læs mere

07100266 Feuling
  • Krumtaphusudluftningssæt og ventileret oliestandmåler, der erstatter originalen
  • Letmetal med låg i poleret rustfrit stål
  • Udlufter overtryk i olietanken via olieseparator, perforeret skive, udskiftelig filterindsats og paraplyventil
  • Reducerer uønsket krumtaphustryk (blowby) og forhindrer, at oliestandmåleren presses ud
  • Mulighed for at aflæse olieniveauet på sidestøttebenet (FHS) eller oprejst (FHU)
  • To valgfrie udluftningstyper medfølger: 1/8" NPT-tilslutning med indvendig porøs filterindsats eller lynkobling med gummislange og filterindsats
  • Komplet sæt med ventileret oliestandmåler, filter, flettet klar PVC-belagt slange og pakninger, hvor det er nødvendigt
  • Fremstillet i USA

Feuling anbefaler et varmt olieniveau på 90–99 %. Da olieopsamlingen sidder på motorens højre side, kan tomgangskørsel på sidestøttebenet fylde krumtaphuset og forvrænge niveauet i tanken. Oliestandmåleren bliver varm under kørsel, brug handsker ved kontrol.

Passer til: Touring 07-16

Färg Black
Material Aluminum
Produkt-typ Oil Dipstick
Tillverkarens Art. Nr. 3092
Färg Polished
Tillverkarens Art. Nr. 3091

Vented Dipstick

  • Billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve
  • Screws into the factory oil fill spout as a stock replacement part
  • Blowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank
  • Fueling test results show a decrease in engine oil sump levels, more freely/smoothe revving engine and increased MPG and decreased blowby
  • Removes unwanted build-up of blow by pressure in the oil tank
  • There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright
  • Includes 2 different venting style options for installing the dipstick: option 1 - 1/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element
  • It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot
  • The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank
  • Made in the USA
  • This dipstick does get hot, use a glove when checking oil level.
  • Oil tank breather kit & vented dipstick. Black cap
  • Comes as complete kit with vented dipstick, filter, braided clear PVC covered line
  • Touring models have the oil tank mounted under the transmission
  • The engine, with two massive pistons going up and down, breathes in to the oil tank
  • This system is a way to vent the oil tank to help reduce pressure build-up and reduce power robbing pressures and stops dipstick blow-out
  • Note: Gaskets are supplied where required

Fits: 07-16 Touring (NU)