Knastaksel S&S Easy Start HP103 indre Twin Cam 99-06

6 955,2 DKK

S&S Easy Start HP103 tandhjulsdrevet knastakselkit med inderdrev
Læs mere

592011 S&S
  • Easy Start-system, der løfter udstødningsventilen ved start for lettere elstart med originalbatteri og startmotor
  • Tandhjulsdrevne knastaksler med kun inderdrev (IG)
  • Ventilløft på .575"
  • Effektområde mellem 3000–6000 RPM med bedst effekt i det høje omdrejningsregister
  • Til 103"-motorer med kompressionsforhold fra 9.7:1 op til 10.5:1
  • Fungerer godt med originale topstykker og udmærket med S&S CNC-portede topstykker

Ikke kompatibel med S&S 79cc-topstykker. Kræver ventilfjedre til højløft, kontrol af frigang samt justerbare skubbestænger til knastaksler fremstillet før januar 2010. Nødvendigt installationskit sælges separat (artikelnr. 503566), og tomgang bør justeres til 1000–1100 RPM for at undgå klikkende lyd under 900 RPM.

Passer til: Twin Cam 99-06

Easy Start gear drive HP103 camshaft set (IG)

  • 575" valve lift
  • IG = Gear drive cams with inner gears only
  • For stock 103" engines with stock 9.7:1CR up to 10.5:1CR
  • Works well with un-ported heads and great for S&S CNC ported heads
  • Best power in the higher RPM range
  • 3000-6000 RPM
  • Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
  • This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
  • After starting the compression release lobe is retracted by centrifugal force
  • The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
  • A stock starter and battery is enough
  • When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
  • Note: Not compatible with S&S 79cc heads
  • Note: Required installation kits for Easy Start Cams are included in complete kits only
  • They are separately available from S&S for this kit as 503566
  • Note: No Easy Start Cam grind is bolt-in for these 99-06 Twin Cam models
  • All will / may require clearancing and require high lift valve springs
  • Note: Camshafts made before Jan
  • 2010 will require adjustable pushrods
  • Note: Below 900 RPM you may hear a clicking sound
  • Adjust idle speed to 1000-1100 RPM

Fits: 99-06 Twin Cam (Excl. 2006 Dyna) (NU)