Knastakselsæt S&S Easy Start HP103 Twin Cam 99-06
S&S Easy Start HP103 tandhjulsdrevet knastakselsæt
Læs mere
- Tandhjulsdrevne knastaksler med indre og ydre drivtandhjul (IOG)
- 0,575" ventilløft og omdrejningsområde på 3000–6000 RPM
- Til standard 103"-motorer med kompressionsforhold fra 9.7:1 op til 10.5:1
- Fungerer godt med uportede topstykker og fremragende med S&S CNC-portede topstykker
- Giver bedst effekt i det højere omdrejningsregister
- Indbygget fjederbelastet dekompressionsventil løfter udstødningsventilen lidt ved start
- Komplet sæt med monteringsdele, lejer og pakning
Ikke kompatibel med S&S 79cc-topstykker. Kræver ventilfjedre til højt løft samt kontrol af frigang, og er ikke bolt-in til 99–06 Twin Cam-modeller. Juster tomgangen til 1000–1100 RPM, da der kan opstå en klikkende lyd under 900 RPM.
Passer til: Twin Cam 99-06
Easy Start gear drive HP103 camshaft kit (IOG)
- 575" valve lift
- IOG = gear drive cams with Inner & Outer drive Gears
- Complete kit with installation hardware, bearings and gasket
- For stock 103" engines with stock 9.7:1CR up to 10.5:1CR
- Works well with un-ported heads and great for S&S CNC ported heads
- Best power in the higher RPM range
- 3000-6000 RPM
- Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
- This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
- After starting the compression release lobe is retracted by centrifugal force
- The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
- A stock starter and battery is enough
- When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
- Note: Not compatible with S&S 79cc heads
- They are separately available as replacement from S&S for this kit as 503566
- Note: No Easy Start Cam grind is bolt-in for these 99-06 Twin Cam models
- All will / may require clearancing and require high lift valve springs
- Note: Camshafts made before Jan
- 2010 will require adjustable pushrods
- Note: Below 900 RPM you may hear a clicking sound
- Adjust idle speed to 1000-1100 RPM
Fits: 99-06 Twin Cam (Excl. 2006 Dyna) (NU)