Knastakselsæt S&S MR103G Twin Cam 99-06

8 983,8 DKK

S&S tandhjulsdrevet knastakselsæt med indre og ydre tandhjul
Læs mere

592014 S&S
  • Tandhjulsdrevet knastakselsæt med .585" ventilløft
  • Konstrueret som bolt-in til 103"-motorer med kompressionsforhold fra 9.7:1 op til 10.5:1
  • Giver mere effekt over hele omdrejningsområdet, med bedste resultat mellem 2500–5500 RPM
  • Fungerer med uberørte originale topstykker og S&S CNC-portede topstykker
  • Tandhjulsdrift eliminerer kædestrammer og kædeslid for øget mekanisk pålidelighed og mere præcise ventiltider
  • Komplet sæt med indre og ydre tandhjul, monteringsdele, lejer og pakning

Justerbare skubbestænger kræves til montering. Materiale kan skulle fjernes fra indersiden af originalens transmissionsdæksel for at give frigang til de ydre tandhjul. Originale ventilfjedre (beehive) på 04–17 Dyna, 04–17 Softail og 04–16 Touring klarer op til .590" ventilløft og 6200 RPM.

Passer til: Twin Cam 99-06

Gear drive MR103G camshaft kit (IOG)

  • 585" valve lift
  • IOG = gear drive cams with Inner & Outer drive Gears
  • Complete kit with installation hardware, bearings and gasket
  • Designed as bolt-in cams for 103 CID engines with stock 9.7:1 compression ratio up to 10.5:1
  • Works well with stock, un-ported heads, but is great for S&S CNC ported heads
  • More power across the rpm range best results form 2500-5500 rpm
  • The gear drive system is in fact a revolutionary different and much more reliable construction
  • Especially in high lift/performance applications, when compared with the OEM chain-drive design
  • A gear driven camshaft is stronger and will not give any of the mechanical problems connected with the OEM chain driven camshafts
  • The S&S gear drive kit will increase valve timing accuracy, and therefore horsepower, by eliminating the timing chain lash and loosely fit stock cam gears
  • The only downside of gear drive is that you may experience a slight increase in mechanical sound, this is why OEM is using a chain
  • It has no other mechanical advantages whatsoever
  • Since the chain guides and tensioner are eliminated there is no longer the possibility for these parts to fail and damage other engine parts
  • The S&S gear drive kit reverses the direction of rotation of the rear cam, providing additional operating clearance between cam lobes
  • As a result, higher cam lifts are possible with the S&S gear driven cams
  • Note: With the exception of the 475G and 510G cam, adjustable pushrods (like MCS 503573) are required to compensate for the smaller camshaft base circle of these cams
  • Note: Material may have to be removed from the inner surface of the OEM gear cover before installation of the S&S outer drive gears
  • Note: Using .625", .635", .640" and .675" lift cams will require crankcase clearancing
  • Note: OEM beehive valve springs of 04-17 Dyna; 04-17 Softail and 04-16 Touring models will acommodate valve lifts up to 590" valve lift and, 160 lb. of valve seat force, up to 6200RPM
  • Running higher than 6200 RPM or lifts greater than 590" will require performance valve springs

Fits: 99-06 Twin Cam (Excl. 2006 Dyna) with stock non-hydraulic chain tensioners (NU)