Kamaxelsats S&S Easy Start 640 Twin Cam 99-06
S&S Easy Start 640 kugghjulsdriven kamaxelsats med inre och yttre drev
Läs mer
- Kugghjulsdrivna kamaxlar (IOG) med inre och yttre drivningsdrev
- Ventillyft på .640"
- För motorer på 95" och uppåt med 10.5:1 till 11.5:1 i kompressionsförhållande (standard i S&S 124"-motorer)
- Easy Start-system med fjäderbelastad dekompressionsventil som lyfter avgasventilen vid start
- Möjliggör elstart av stora motorer med standardbatteri och standardstartmotor
- Komplett sats med monteringshårdvara, lager och packning
- Kammarna fungerar som vanliga kamaxlar utan effektförlust när motorn startat
Ej kompatibel med modeller med kickstart. Kamslipningen är inte bolt-in utan kräver frigångskontroll samt ventilfjädrar för höga lyft. Ett klickande ljud kan höras under 900 RPM, justera tomgången till 1000–1100 RPM.
Passar: Twin Cam 99-06
Easy Start gear drive 640 camshaft kit (IOG)
- 640" valve lift
- IOG = gear drive cams with Inner & Outer drive Gears
- Complete kit with installation hardware, bearings and gasket
- For 95"-up with 10.5:1 to 11.5:1 CR (stock in S&S 124" engines)
- Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
- This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
- After starting the compression release lobe is retracted by centrifugal force
- The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
- A stock starter and battery is enough
- When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
- It is separately available as replacement from S&S for this kit as 503566
- Note: No Easy Start Cam grind is bolt-in for these 99-06 Twin Cam models
- All will / may require clearancing and require high lift valve springs
- Note: Not compatible with kickstart models
- Note: Camshafts made before Jan
- 2010 will require adjustable pushrods
- Note: Below 900 RPM you may hear a clicking sound
- Adjust idle speed to 1000-1100 RPM
Fits: 99-06 Twin Cam (Excl. 2006 Dyna) (NU)