Kamaxelsats S&S Easy Start 675 Twin Cam 99-06

14 470 kr

S&S Easy Start 675 kamaxelsats med kuggdrivning
Läs mer

531732 S&S
  • Easy Start-system underlättar elstart genom att öppna avgasventilen något vid start
  • Dekompressionsventilen dras tillbaka automatiskt av centrifugalkraften när motorn startar
  • IOG-utförande med inre och yttre kuggdrivning
  • Lyft: 0,675"
  • Varvtalsområde: 4500–6500 RPM
  • För motorer på 120"+ med minst 11:1 i kompressionsförhållande
  • Komplett sats med monteringsdetaljer, lager och packning

Kräver ventilfjädrar för höga lyft samt kontroll av frigång då denna kamslipning inte är bolt-in för 99-06 Twin Cam. Ej kompatibel med kickstart. Justera tomgång till 1000–1100 RPM för att undvika klickande ljud under 900 RPM.

Passar: Twin Cam 99-06

Easy Start gear drive 675 camshaft kit (IOG)

  • 675" valve lift
  • IOG = gear drive cams with Inner & Outer drive Gears
  • Complete kit with installation hardware, bearings and gasket
  • Very high lift
  • For +120" engines with at least 1:11 CR
  • 4500-6500 RPM
  • Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
  • This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
  • After starting the compression release lobe is retracted by centrifugal force
  • The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
  • A stock starter and battery is enough
  • When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
  • It is separately available as replacement from S&S for this kit as 503566
  • Note: No Easy Start Cam grind is bolt-in for these 99-06 Twin Cam models
  • All will / may require clearancing and require high lift valve springs
  • Note: Not compatible with kickstart models
  • Note: Camshafts made before Jan
  • 2010 will require adjustable pushrods
  • Note: Below 900 RPM you may hear a clicking sound
  • Adjust idle speed to 1000-1100 RPM

Fits: 99-06 Twin Cam (Excl. 2006 Dyna) (NU)