Svänghjul S&S 106″ H-D 99-06
106" stroker-svänghjulssats för Twin Cam
Läs mer
- Slaglängd på 4-1/2"
- Tredelat monterat svänghjul inklusive axlar
- Kräver inga modifieringar av motorblocket
- Balanserat för 1108 gram total kolvvikt
- Andra generationens vevtapp med 1,671" OEM-diameter
- Tillverkat i USA
Avsett för Timken-lager på drivaxeln (passar 99-02 originalblock och alla S&S-block utan modifiering). Vid montering på 03-17 Twin Cam krävs konvertering till Timken-lager, S&S lämnar ingen garanti om rullager av 03-17-typ används (JIMS konverteringsverktygssats MCS 978517 finns tillgänglig). Originalcylindrar måste borras till 3.875", insprutningssystem kräver omkalibrering och motorer med över 4" slaglängd kan kräva S&S kolvkylningsmunstycken samt urtag i kolvkjolen.
Passar: Twin Cam 99-06
OEM-nr: 24004-03B, 24605-07
| Produkt-typ | Flywheel Assembly |
| Tillverkarens Art. Nr. | 320-0460 |
106" Stroker Flywheel Kit
- Feature three-piece assembled flywheels with shafts
- Do not require any motor case modification
- 4-1/2" stroke
- 103" stock motors or motors with factory 95" kits require piston kit only; stock or S&S cylinder heads can be used
- Stock cylinders will require boring to 3.875"
- Made in the USA
- Fuel-injected motors will require recalibration of the fuel-injection system.
- This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications.
- 106" stroker engine
- Balanced to 1108 grams total piston weight
- Note: Engines with strokes exceeding 4" may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact
- Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods
- The first generation of S&S crankpins, in use up to 2012, were 1.500" diameter
- The second generation crankpins, in use since 2013, have the larger 1.671" OEM diameter crankpins
- Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available
- Note: Following is regarding 03-17 models
- S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications
- Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution
- However, S&S feels this roller bearing will not take the side loads produced in a high performance motor
- S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used
- To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available
- This kit includes a tool, a Timken bearing and a steel crankcase bearing insert for one motor
- Bearing inserts only are available as 978519, bearings only as 508960
- Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
- It is of importance that a knowledgeable mechanic will install & make adjustments as required
Fits: 99-06 Twin Cam (Excl. 2006 Dyna) (NU)