Svänghjul S&S Wrist 1035 koniska H-D 07-15
S&S tredelat svänghjulspaket med 4-3/8" slaglängd
Läs mer
- Tredelad konstruktion med integrerade axlar tillverkade i 4140 stål
- Större vevtapp med 1,671" diameter
- Passar direkt i originalvevhus utan modifieringar
- Vevstakar med koniska kolvbultsändar som är kompatibla med originalkolvar
- Balanserat för 1035 gram total kolvvikt
- Med påpressad lagerbana för original rullager (icke Timken)
- Tillverkat i USA
Motorer med slaglängd över 4" kan kräva S&S kolvoljemunstycken samt urtag i kolvkjolen för frigång. Svänghjulspaket utan kedjehjulslagerbana är avsedda för Timken-konvertering (säljs separat). Montering och anpassning kräver fackkunskap.
Passar: Dyna 06-17
OEM-nr: 24004-03B
| Material | Steel |
| Produkt-typ | Flywheel Assembly |
| Tillverkarens Art. Nr. | 320-0352 |
| OEM-nr | 23729-07B |
Replacement Flywheel Assembly
- S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
- Fits directly in stock crankcases with no modifications
- Made in the U.S.A.
- Flywheel assembly without sprocket bearing race are designed for use with Timken bearing conversion (sold separately).
- 06-17 4-3/8" stroke flywheel assembly. For OEM
- OEM compatible
- Stock 96", 103", 110" stroke is 4-3/8"
- These S&S conrods have a (non Timken) pressed-on sprocket shaft roller bearing race for use with the stock 24004-03B sprocket shaft bearing, a weaker solution but compatible with OEM components
- Complete with tapered wrist pin ends that are compatible with stock H-D pistons
- Balanced to 1035 grams total piston weight, which is compatible with OEM
- Note: Engines with strokes exceeding 4" may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact
- Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods
- The first generation of S&S crankpins, in use up to 2012, were 1.500" diameter
- Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available
- Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
- It is of importance that a knowledgeable mechanic will install & make adjustments as required
Fits: 06-17 Dyna; 07-16 FLT/Touring. With OEM 96", 103"or 110 pistons & OEM sprocket shaft bearing (NU)