Svänghjul S&S Stroke TC88A 4.0 H-D 99-06
S&S 3-delat svänghjul med 4" slaglängd
Läs mer
- Tillverkat i 4140 stål med integrerade huvudaxlar
- Standard 4" slaglängd
- Grövre vevtapp på 1.671" (OEM-diameter)
- Passar direkt i originalvevhus utan modifieringar
- Möjliggör utbytbara lagerbanor i vevstakarnas nedre ände
- Konstruerat för användning med Timken-kedjedrevsaxellager
- Tillverkat i USA
Svänghjulsenheten levereras utan lagerbana för kedjedrevsaxel och kräver Timken-konvertering (säljs separat). Passar originalvevhus 99–02 samt alla S&S-vevhus utan modifiering, vid montering på 03–17 Twin Cam krävs konvertering till Timken-lager då rullager inte godkänns av S&S. Konverteringsverktygssats från JIMS finns som 978517, lösa lagerinsatser som 978519 och lager som 508960.
Passar: Twin Cam 99-06
OEM-nr: 24004-03B, 24605-07
| Material | Steel |
| Produkt-typ | Flywheel Assembly |
| Tillverkarens Art. Nr. | 320-0403 |
Replacement Flywheel Assembly
- S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
- Fits directly in stock crankcases with no modifications
- Made in the U.S.A.
- Flywheel assembly without sprocket bearing race are designed for use with Timken bearing conversion (sold separately).
- 99-06 4" stroke flywheel assembly
- Standard 4" stroke
- Note: Engines with strokes exceeding 4" may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact
- Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods
- The first generation of S&S crankpins, in use up to 2012, were 1.500" diameter
- The second generation crankpins, in use since 2013, have the larger 1.671" OEM diameter crankpins
- Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available
- Note: Following is regarding 03-17 models
- S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications
- Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution
- However, S&S feels this roller bearing will not take the side loads produced in a high performance motor
- S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used
- To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available
- Bearing inserts only are available as 978519, bearings only as 508960
- Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
- It is of importance that a knowledgeable mechanic will install & make adjustments as required
Fits: 99-06 Twin Cam (Excl. 2006 Dyna) (NU)