Kamaxelsats S&S 551 Easy Start H-D 03-16

7 570 kr

S&S 551 Easy Start kamaxelsats med kedjedrivning
Läs mer

09250443 S&S
  • Easy Start-funktion minskar startkompressionen via fjäderbelastad lob på avgasventilen
  • Optimerad för 88"/96"/103" till 106" Touring med slip-on ljuddämpare och 9.0:1–9.0:9 kompression
  • Förbättrar vridmomentet markant på låga och mellanregister (starkast från tomgång till 4000 rpm)
  • Bolt-in-installation för original eller lätt modifierade motorer
  • Lyft: .550"
  • Kan användas med original stötstänger, lyftare och ventilfjädrar
  • Innehåller kamaxlar, transmissionskåpspackning, lager, låsring, o-ring, gänglåsning och anvisningar
  • Tillverkad i USA

Rekommenderas inte för kompressionsförhållanden på 10.0:1 eller högre, och passar inte modeller med OEM dekompressionsventiler eller kickstart. Montören måste kontrollera ventilfjäderbottning (coil bind) samt ventil-till-ventil- och ventil-till-kolvspel. Justera tomgång till 1000–1100 rpm (klickande ljud kan uppstå under 900 rpm), årsmodell 2010 kräver justerbara stötstänger.

Passar: H-D 03-16

Produkt-typ Cam Kit
Tillverkarens Art. Nr. 106-4947

551 Easy Start Camshaft Kit

  • Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
  • Optimized for 88"/96"/103" to 106" Touring bike with slip-on mufflers and 9.0:1 to 9.0:9 compression with stock starter
  • Bolt-in for stock or mildly modified Touring models
  • Greatly improves low-end and midrange torque
  • Strongest from idle to 4000 rpm
  • Includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, threat lock and instructions
  • Made in the USA
  • Not recommended for compression ratios of 10.0:1 or greater.
  • Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
  • Not for models with OEM compression releases.
  • Can be used with stock pushrods, lifters, and springs (unless noted).
  • Easy Start chain drive 551 camshaft set (CD)
  • 550" valve lift
  • Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
  • This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
  • After starting the compression release lobe is retracted by centrifugal force
  • The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
  • A stock starter and battery is enough
  • When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
  • Note: Only 551, 570, 583, 585, HP103 and MR103 series cams are bolt-in, all others may / will require clearancing and require high lift valve springs
  • Note: Not compatible with kickstart models
  • 2010 will require adjustable pushrods
  • Note: Below 900 RPM you may hear a clicking sound
  • Adjust idle speed to 1000-1100 RPM

Fits: 07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)