Kamaxelsats S&S 570 Easy Start H-D 03-16

8 560 kr

S&S 570 Easy Start kamaxelsats med kedjedrivning
Läs mer

09250444 S&S
  • Easy Start-funktion underlättar elstart genom att minska kompressionen via en fjäderbelastad lob på avgasventilen som dras tillbaka med centrifugalkraft
  • Designad för 88"-, 95"- och 103"-motorer med kompressionsförhållande mellan 9.0:1 och 10.0:1
  • Effektökning över hela registret från 3200 till 5700 rpm
  • .570" ventillyft
  • Bolt-in-montering utan krav på modifierat ventilspel
  • Innehåller kamaxlar, transmissionskåpspackning, lager, låsring, O-ring, gänglåsning och instruktioner
  • Möjliggör start med originalstarter och standardbatteri utan prestandaförlust vid drift
  • Tillverkad i USA

Ej kompatibel med modeller som har OEM dekompressionsventiler eller kickstart. För 2010 års modeller krävs justerbara stötstänger. Installatören måste kontrollera ventilfjädrarnas bottning samt frigång mellan ventiler och mellan ventil och kolv. Tomgång bör justeras till 1000–1100 rpm, då ett klickande ljud kan uppstå under 900 rpm.

Passar: Softail 07-17

Produkt-typ Cam Kit
Tillverkarens Art. Nr. 106-5234

570 Easy Start Camshaft Kit

  • Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
  • Designed for 88"/95"/103" engines with compression ratios between 9.0:1 and 10.0:1
  • Power increase across entire power band from 3200 rpm - 5700 rpm
  • Bolt-in
  • Includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, threat lock and instructions
  • Made in the USA
  • Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
  • Not for models with OEM compression releases.
  • Easy Start chain drive 570 camshaft set (CD)
  • 570" valve lift
  • Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
  • This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
  • After starting the compression release lobe is retracted by centrifugal force
  • The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
  • A stock starter and battery is enough
  • When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
  • Note: Only 551, 570, 583, 585, HP103 and MR103 series cams are bolt-in, all others may / will require clearancing and require high lift valve springs
  • Note: Not compatible with kickstart models
  • 2010 will require adjustable pushrods
  • Note: Below 900 RPM you may hear a clicking sound
  • Adjust idle speed to 1000-1100 RPM

Fits: 07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)