Kamaxelsats S&S 585 Easy Start Chain-driven 585CE H-D 03-16

8 700 kr

S&S 585 Easy Start kamaxelsats med kedjedrivning
Läs mer

09250446 S&S
  • Easy Start-system som minskar startkompressionen via en fjäderbelastad lob på avgasventilen
  • Konstruerad för 88–106"-motorer med kompressionsförhållande 9.7:1 till 10.5:1 samt 106–124"-motorer med 9.0:1 till 10.0:1
  • Ventillyft på .585"
  • Ger ökad effekt och vridmoment från 3000 rpm upp till varvstoppet (3500–6000 rpm för 88–103", 2200–5000 rpm för större motorer)
  • Bolt-in-montering som fungerar med standardstartmotor och standardbatteri
  • Innehåller kamaxlar, transkåpspackning, lager, låsring, o-ring, gänglåsning och monteringsanvisning
  • Tillverkad i USA

Passar inte modeller med OEM dekompressionsventiler och är ej kompatibel med kickstart. Installatören måste kontrollera ventilfjädrarnas sammanpressning samt frigång mellan ventil-ventil och ventil-kolv. Justera tomgång till 1000–1100 rpm (ett klickande ljud kan höras under 900 rpm), 2010 kräver justerbara stötstänger.

Passar: H-D 03-16

Produkt-typ Cam Kit
Tillverkarens Art. Nr. 106-5233

585 Easy Start Camshaft Kit

  • Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
  • Designed for 88 - 106 CID engines with compression ratios from 9.7:1 to 10.5:1 and 106 - 124 CID engines from 9.0:1 to 10.0:1 compression
  • Provides massive horsepower and torque increasses starting at 3000 rpm and hold steady to redline
  • 3500 rpm - 6000 rpm for 88"-103" engines and 2200 rpm - 5000 rpm for larger engines
  • Bolt-in
  • Includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, threat lock and instructions
  • Made in the USA
  • Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
  • Not for models with OEM compression releases.
  • Easy Start chain drive 585 camshaft set (CD)
  • 585" valve lift
  • Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
  • This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
  • After starting the compression release lobe is retracted by centrifugal force
  • The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
  • A stock starter and battery is enough
  • When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
  • Note: Only 551, 570, 583, 585, HP103 and MR103 series cams are bolt-in, all others may / will require clearancing and require high lift valve springs
  • Note: Not compatible with kickstart models
  • 2010 will require adjustable pushrods
  • Note: Below 900 RPM you may hear a clicking sound
  • Adjust idle speed to 1000-1100 RPM

Fits: 07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)