Knastaksel S&S Easy Start 570 Softail 07-17

5 906,4 DKK

S&S 570 Easy Start-knastakselsæt med kædedrev
Læs mere

09250444 S&S
  • Easy Start-funktion gør det lettere at starte med elstart ved at reducere kompressionen via en fjederbelastet lobe på udstødsventilen, som trækkes tilbage med centrifugalkraft
  • Designet til 88"-, 95"- og 103"-motorer med kompressionsforhold mellem 9.0:1 og 10.0:1
  • Effektforøgelse over hele registret fra 3200 til 5700 rpm
  • .570" ventilløft
  • Bolt-in-montering uden krav om ændret ventilspil
  • Indeholder knastaksler, pakning til transmissionsdæksel, lejer, låsering, O-ring, gevindlås og instruktioner
  • Muliggør start med original startmotor og standardbatteri uden ydelsestab under drift
  • Fremstillet i USA

Ikke kompatibel med modeller, der har OEM-dekompressionsventiler eller kickstart. Til 2010-modeller kræves justerbare skubbestænger. Installatøren skal kontrollere ventilfjedrenes bundning samt frigang mellem ventiler og mellem ventil og stempel. Tomgang bør indstilles til 1000–1100 rpm, da der kan opstå en klikkende lyd under 900 rpm.

Passer til: Softail 07-17

Produkt-typ Cam Kit
Tillverkarens Art. Nr. 106-5234

570 Easy Start Camshaft Kit

  • Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
  • Designed for 88"/95"/103" engines with compression ratios between 9.0:1 and 10.0:1
  • Power increase across entire power band from 3200 rpm - 5700 rpm
  • Bolt-in
  • Includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, threat lock and instructions
  • Made in the USA
  • Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
  • Not for models with OEM compression releases.
  • Easy Start chain drive 570 camshaft set (CD)
  • 570" valve lift
  • Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
  • This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
  • After starting the compression release lobe is retracted by centrifugal force
  • The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
  • A stock starter and battery is enough
  • When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
  • Note: Only 551, 570, 583, 585, HP103 and MR103 series cams are bolt-in, all others may / will require clearancing and require high lift valve springs
  • Note: Not compatible with kickstart models
  • 2010 will require adjustable pushrods
  • Note: Below 900 RPM you may hear a clicking sound
  • Adjust idle speed to 1000-1100 RPM

Fits: 07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)