Knastaksel S&S Easy Start 583 Softail 07-17
S&S 583 Easy Start knastakselsæt med kædetræk
Læs mere
- Easy Start-systemet reducerer kompressionen ved start og vender centrifugalt tilbage ved højere omdrejningstal
- Muliggør nem elstart med originalt batteri og startmotor
- Giver kraftigt drejningsmoment og effekt ved lave omdrejningstal, kraftigst mellem 1500 og 5000 rpm
- .583" ventilløft
- Bolt-in-montering
- Indeholder knastaksler, pakning til gearkassedæksel, lejer, låsering, O-ring, gevindlås og instruktioner
- Fremstillet i USA
Til 88" til 103" motorer med kompressionsforhold mellem 9.7:1 og 10.5:1 samt 106" til 124" motorer med 9:1 til 10:1 CR (anbefales ikke til kompressionsforhold på 10.0:1 eller højere). Ikke kompatibel med kickstart eller modeller med OEM dekompressionsventiler, 2010 kræver justerbare stødstænger. Juster tomgang til 1000–1100 rpm (klikkende lyd kan forekomme under 900 rpm), montøren skal kontrollere ventilfrigang og coil bind.
Passer til: Softail 07-17
| Produkt-typ | Cam Kit |
| Tillverkarens Art. Nr. | 106-5807 |
583 Easy Start Camshaft Kit
- Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- Optimiized for use as a great overall camshaft for Softail and Dyna, but can be used in any Big Twin
- Provides strong low-end torque and horsepower
- Strongest from 1500 rpm to 5000 rpm in Softail and Dyna models
- Bolt-in
- Includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, threat lock and instructions
- Made in the USA
- Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
- Not for models with OEM compression releases.
- Not recommended for compression ratios of 10.0:1 or greater.
- Easy Start chain drive 583 camshaft set (CD)
- 583" valve lift
- 88 to 103" engines with compression ratios between 9.7:1 to 10.5:1 and 106" to 124" engines with 9:1 to 10:1 CR
- Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
- This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
- After starting the compression release lobe is retracted by centrifugal force
- The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
- A stock starter and battery is enough
- When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
- Note: Only 551, 570, 583, 585, HP103 and MR103 series cams are bolt-in, all others may / will require clearancing and require high lift valve springs
- Note: Not compatible with kickstart models
- 2010 will require adjustable pushrods
- Note: Below 900 RPM you may hear a clicking sound
- Adjust idle speed to 1000-1100 RPM
Fits: 07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)