Knastaksel S&S Easy Start 585 Softail 07-17
S&S 585 Easy Start knastakselsæt til kædedrev
Læs mere
- Easy Start-funktionen reducerer startkompressionen via udstødningsventilens løft og vender automatisk tilbage ved start
- Konstrueret til 88–106"-motorer (9,7:1–10,5:1 kompression) og 106–124"-motorer (9,0:1–10,0:1 kompression)
- Giver kraftig forøgelse af hestekræfter og drejningsmoment fra 3000 rpm op til rødmarkeringen
- Arbejdsområde 3500–6000 rpm for 88–103" og 2200–5000 rpm for større motorer
- .585" ventilløft med bolt-in-montering
- Indeholder knastaksler, pakning til transmissionsdæksel, lejer, låsering, O-ring, gænglåsning og anvisninger
- Fremstillet i USA
Ikke kompatibel med kickstartmodeller eller modeller med OEM-dekompressionsventil. Juster tomgang til 1000–1100 rpm, da der kan opstå klikkende lyde under 900 rpm. Montøren skal kontrollere, at ventilfjedrene ikke går i bund (coil bind), samt frigang mellem ventiler og mellem ventil og stempel (2010 kræver justerbare stødstænger).
Passer til: Softail 07-17
| Produkt-typ | Cam Kit |
| Tillverkarens Art. Nr. | 106-5233 |
585 Easy Start Camshaft Kit
- Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- Designed for 88 - 106 CID engines with compression ratios from 9.7:1 to 10.5:1 and 106 - 124 CID engines from 9.0:1 to 10.0:1 compression
- Provides massive horsepower and torque increasses starting at 3000 rpm and hold steady to redline
- 3500 rpm - 6000 rpm for 88"-103" engines and 2200 rpm - 5000 rpm for larger engines
- Bolt-in
- Includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, threat lock and instructions
- Made in the USA
- Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
- Not for models with OEM compression releases.
- Easy Start chain drive 585 camshaft set (CD)
- 585" valve lift
- Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
- This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
- After starting the compression release lobe is retracted by centrifugal force
- The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
- A stock starter and battery is enough
- When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
- Note: Only 551, 570, 583, 585, HP103 and MR103 series cams are bolt-in, all others may / will require clearancing and require high lift valve springs
- Note: Not compatible with kickstart models
- 2010 will require adjustable pushrods
- Note: Below 900 RPM you may hear a clicking sound
- Adjust idle speed to 1000-1100 RPM
Fits: 07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)