Knastaksel S&S 585G Softail 07-17 33-5268
S&S tandhjulsdrevet knastakselsæt
Læs mere
- Ventilløft: .585"
- Effektområde: 3500–6000 rpm for 88" til 103" og 2500–5500 rpm for større motorer
- Tandhjulsdrift eliminerer kædeslæk og svage originale kædestrammere
- Vender den bageste knastaksels rotationsretning for ekstra frigang og højere løft
- Sættet indeholder knastaksler, indre og ydre tandhjul, lejer, pakning og instruktioner
- Fremstillet i USA
Kræver justerbare stødstænger på grund af mindre grundcirkel. Materiale skal slibes af på indersiden af transmissionsdækslet, og montering kræver hydraulikpresse og professionelt værktøj. Installatøren skal kontrollere ventilfrigang samt fjedertryk.
Passer til: Softail 07-17
| Produkt-typ | Cam Kit |
| Tillverkarens Art. Nr. | 33-5268 |
585G Gear Drive Camshaft Kit
- Designed for 88/96/103/110 cubic-inch engines with compression ratios from 10.0:1 to 10.5:1
- Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes making higher cam lifts possible
- Increases valve timing accuracy by eliminating chain lash and loosely fit stock chain drive
- Material must be removed from inner surface of the stock gear cover to install
- 3500-6000 rpm for 88" to 103" engines and 2500-5500 rpm for larger engines
- A hydraulic press and other professional level tool are required for installation
- S&S recommends that adjustable pushrod/cover get be used
- Cam bearings and gaskets must be replaced when installing new cams
- Kit includes camshafts, inner gears, outer gears, inner bearings, outer bearings, gasket and instructions
- Installer must check coil bind, valve to valve clearance and valve to piston clearance.
- Due to the inherent characteristics of gear drives, more valve train noise may occur.
- Made in the USA
- 585" valve lift
- Bolt-in 88" to 106" with 9.7:1 to 10.5 CR and 106" to 124" with 9:1 to 10:1 CR
- 3500-6000 RPM for 88" to 103" and 2500-5500 for larger engines The gear drive system is in fact a revolutionary different and much more reliable construction
- Especially in high lift/performance applications, when compared with the OEM chain-drive design
- A gear driven camshaft is stronger and will not give any of the mechanical problems connected with the OEM chain driven camshafts
- The only downside of gear drive is that you may experience a slight increase in mechanical sound, this is why OEM is using a chain
- It has no other mechanical advantages whatsoever
- Since the chain guides and tensioner are eliminated there is no longer the possibility for these parts to fail and damage other engine parts
- Note: With the exception of the 475G and 510G cam, adjustable pushrods (like MCS 503573) are required to compensate for the smaller camshaft base circle of these cams
- Note: OEM beehive valve springs of 04-17 Dyna; 04-17 Softail and 04-16 Touring models will acommodate valve lifts up to 590" valve lift and, 160 lb. of valve seat force, up to 6200RPM
- Running higher than 6200 RPM or lifts greater than 590" will require performance valve springs
Fits: 07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)