Knastakselsæt S&S Easy Start 585 Softail 07-17

10 177,5 DKK

S&S 585 Easy Start knastakselsæt med tandhjulsdrift
Læs mere

09250451 S&S
  • Easy Start-teknik reducerer startkompressionen via en fjederbelastet knast på udstødningsventilen, der trækkes tilbage centrifugalt, når motoren starter
  • Konstrueret til 88–106 CID-motorer med kompressionsforhold 9.7:1–10.5:1 samt 106–124 CID med 9.0:1–10.0:1
  • Giver øget effekt og drejningsmoment fra 3000 rpm op til omdrejningsgrænsen
  • Arbejdsområde 3500–6000 rpm for 88"–103"-motorer og 2200–5000 rpm for større motorer
  • .585" ventilløft
  • Tandhjulsdrift (IOG) med indre og ydre drivtandhjul
  • Indeholder knastaksler, 4-tandhjulssæt, dækselpakning, lejer, låsering, O-ring, gevindlåsning og monteringsvejledning
  • Fremstillet i USA

Ikke egnet til modeller med OEM-dekompressionsventiler og ikke kompatibel med kickstart. Årgang 2010 kræver justerbare stødstænger. Montøren skal kontrollere, om ventilfjedrene går i blok (coil bind), samt frigang mellem ventil-ventil og ventil-stempel. Juster tomgang til 1000–1100 rpm for at undgå klikkelyde under 900 rpm. Tandhjulsdrift kan medføre øget mekanisk støj fra ventiltrækket.

Passer til: Softail 07-17

Produkt-typ Cam Kit
Tillverkarens Art. Nr. 106-5225

585 Easy Start Camshaft Kit

  • Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
  • Designed for 88 - 106 CID engines with compression ratios from 9.7:1 to 10.5:1 and 106 - 124 CID engines from 9.0:1 to 10.0:1 compression
  • Provides massive horsepower and torque increasses starting at 3000 rpm and hold steady to redline
  • 3500 rpm - 6000 rpm for 88"-103" engines and 2200 rpm - 5000 rpm for larger engines
  • Bolt-in
  • Includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, threat lock and instructions
  • Made in the USA
  • Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
  • Not for models with OEM compression releases.
  • 585" valve lift
  • IOG = gear drive cams with Inner & Outer drive Gears
  • Complete kit with installation hardware, bearings and gasket
  • Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting
  • This is done by lifting the exhaust valve slightly of its seat, with a spring loaded compression release lobe inside the camshaft
  • After starting the compression release lobe is retracted by centrifugal force
  • The only difference is during starting since you will now be able to electric start your Big Inch engine effortless, without the use of big batteries and/or starter motors
  • A stock starter and battery is enough
  • When the engine is running the camshafts function as regular cams, without any loss in power, torque or anything else
  • Note: Only 551, 570, 583, 585, HP103 and MR103 series cams are bolt-in, all others may / will require clearancing and require high lift valve springs
  • Note: Not compatible with kickstart models
  • 2010 will require adjustable pushrods
  • Note: Below 900 RPM you may hear a clicking sound
  • Adjust idle speed to 1000-1100 RPM

Includes 4-gear set. Due to the inherent characterics of gear drives, there may be more valve train noise.

Fits: 07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)