Svänghjul S&S 3 Piece 88 4-5/8 H-D 99-06

28 730 kr

S&S 3-delat svänghjul för 124" T-Series motorer
Läs mer

09220151 S&S
  • Tillverkat i 4140 stål med integrerade huvudaxlar och 1.671" vevtapp
  • Passar direkt i originalvevhus utan modifieringar
  • 4-5/8" slaglängd och 8-1/2" diameter på svänghjul
  • Balanserat för en total kolvvikt på 1035 gram
  • För 124" T-series motorer med 4-1/8" borrning
  • Vevtappen tillåter utbytbara lagerbanor i vevstakarnas nedre ände
  • Utformat för användning med Timken-konvertering (säljs separat)
  • Tillverkat i USA

Passar originalvevhus 99–02 och alla S&S-vevhus utan modifiering, för 03–17 Twin Cam krävs uppgradering till Timken-lager då rullager inte godkänns av S&S. För motorer med slaglängd över 4" kan S&S kolvoljemunstycken samt urtag i kolvkjolen krävas för frigång.

Passar: H-D 99-06

OEM-nr: 24004-03B, 24605-07

Material Steel
Produkt-typ Flywheel Assembly
Tillverkarens Art. Nr. 320-0475

Replacement Flywheel Assembly

  • S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
  • Fits directly in stock crankcases with no modifications
  • Made in the U.S.A.
  • Flywheel assembly without sprocket bearing race are designed for use with Timken bearing conversion (sold separately).
  • Flywheel assembly for 124" T-series 4-1/8" bore engines
  • 4-5/8" stroke with 8-1/2" diameter flywheels
  • Balanced to 1035 grams total piston weight
  • No hassle in rebuilding or getting the right parts, it's all here in one package
  • These are exactly set-up like the flywheels used in current S&S production engines
  • Note: Engines with strokes exceeding 4" may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact
  • Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods
  • The first generation of S&S crankpins, in use up to 2012, were 1.500" diameter
  • The second generation crankpins, in use since 2013, have the larger 1.671" OEM diameter crankpins
  • Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available
  • Note: Following is regarding 03-17 models
  • S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications
  • Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution
  • However, S&S feels this roller bearing will not take the side loads produced in a high performance motor
  • S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used
  • To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available
  • Bearing inserts only are available as 978519, bearings only as 508960
  • Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
  • It is of importance that a knowledgeable mechanic will install & make adjustments as required

Fits: 99-06 Twin Cam (excl. 2006 Dyna); Stock replacement for S&S T124/T116 engines


Liknande produkter

Svänghjul S&S 106″ H-D 99-06 915267k-8835fefb
S&S Svänghjul S&S 106″ H-D 99-06
09220117
25 280 kr
Svänghjul S&S Wrist 1035 koniska H-D 07-15
Svänghjul S&S 4 Stroke H-D 99-06
Svänghjul S&S 4 Stroke Width Wrist H-D 99-06
Svänghjul S&S Stroke TC88A 4.0 H-D 99-06 915173k-ccf6dbd1