Pullback/Sweep: 13,5 cm (5-1/4 )
Base Finish: Powder-Coated
Controls Diameter: 25,4 mm (1 )
Color/Finish: Black| Powder-Coated
Handlebar Diameter: 32 mm (1-1/4 )
Features: Accepts Heated Grips| For Hydraulic Clutch| Knurled Center| Notched for Throttle-By-Wire| Pre-Drilled
Material: Steel
Base Color: Black
Units: Each
Center Width: 30,5 cm (12 )
Product Name: Handlebar
Type/Bend: Ape Hanger| Touring| Twin Peaks
Width: 85 cm (33-1/2 )
Clamping Diameter: 25,4 mm (1 )
End Rise: 25,5 cm (10 )
La Choppers 10" Bagger Twin Peaks Ape Hanger - 1.25" Black Handlebar 1
4880 kr
- Översikt
- Passar till
Ge ditt omdöme
Artikelnummer: 06012698
Leveranstid:
Frakt:
1-1/4 Twin Peaks Touring Handlebar
Pullback/Sweep: 13,5 cm (5-1/4 )
Base Finish: Powder-Coated
Controls Diameter: 25,4 mm (1 )
Color/Finish: Black| Powder-Coated
Handlebar Diameter: 32 mm (1-1/4 )
Features: Accepts Heated Grips| For Hydraulic Clutch| Knurled Center| Notched for Throttle-By-Wire| Pre-Drilled
Material: Steel
Base Color: Black
Units: Each
Center Width: 30,5 cm (12 )
Product Name: Handlebar
Type/Bend: Ape Hanger| Touring| Twin Peaks
Width: 85 cm (33-1/2 )
Clamping Diameter: 25,4 mm (1 )
End Rise: 25,5 cm (10 )
Enhet: | Styck |
Material: | Steel |
Produkt-typ: | Handlebar |
Tillverkarens Art. Nr.: | LA-7361-10B |
Färg: | Black |
"1-1/4"" Twin Peaks Touring Handlebar
Handlebars with an emphasis on touring comfort More parallel wrist angles for a perfect pullback angle and stress-free riding Flowing bends on the uprights designed specifically for Batwing fairing bikes Drilled for internal wiring Work with hydraulic clutches Can be used on cable and TBW (Throttle By Wire) applications Accept H-D OEM heated grips. Made in the U.S.A.
"1-1/4 Twin Peaks Touring HandlebarHandlebars with an emphasis on touring comfort More parallel wrist angles for a perfect pullback angle and stress-free riding Flowing bends on the uprights designed specifically for Batwing fairing bikes Drilled for internal wiring Works with hydraulic clutches Can be used on cable and TBW (Throttle By Wire) applications Made in the U.S.A. Accepts H-D OEM heated grips.
"
Kundomdömen
Se fler varor
"Springer Handlebar Riser Kit
Kits include two risers with top clamps and all necessary mountin...
Kits include two risers with top clamps and all necessary mountin...
2632 kr
Rear Suspension Lowering Kit for Indian
Replace the stock suspension armsGive your bike the low...
Replace the stock suspension armsGive your bike the low...
1056 kr
"1"" Old School Handlebar
Made with high-strength 1"" diameter steel tubingTIG welded for stren...
Made with high-strength 1"" diameter steel tubingTIG welded for stren...
2784 kr