Width: 89 cm (35 )
Base Finish: Gloss
Features: Accepts Heated Grips| For Hydraulic Clutch| Knurled Center| Notched for Throttle-By-Wire| Pre-Drilled
Pullback/Sweep: 28 cm (11 )
Color/Finish: Black| Gloss
Handlebar Diameter: 32 mm (1-1/4 )
Material: Steel
Product Name: Handlebar
Center Width: 23 cm (9 )
Clamping Diameter: 32 mm (1-1/4 )
Units: Each
End Rise: 20,5 cm (8 )
Type/Bend: Touring
Base Color: Black
Controls Diameter: 25,4 mm (1 )
La Choppers 20,32 Cm (8") Handlebar Moose Knuckle / Black-Gloss Handle
4870 kr
- Översikt
- Passar till
Ge ditt omdöme
Artikelnummer: 06013849
Leveranstid:
Frakt:
1-1/4 Moose Knuckle Touring Handlebar
Width: 89 cm (35 )
Base Finish: Gloss
Features: Accepts Heated Grips| For Hydraulic Clutch| Knurled Center| Notched for Throttle-By-Wire| Pre-Drilled
Pullback/Sweep: 28 cm (11 )
Color/Finish: Black| Gloss
Handlebar Diameter: 32 mm (1-1/4 )
Material: Steel
Product Name: Handlebar
Center Width: 23 cm (9 )
Clamping Diameter: 32 mm (1-1/4 )
Units: Each
End Rise: 20,5 cm (8 )
Type/Bend: Touring
Base Color: Black
Controls Diameter: 25,4 mm (1 )
| Enhet: | Styck |
| Material: | Steel |
| Produkt-typ: | Handlebar |
| Tillverkarens Art. Nr.: | LA-7312-07B |
| Färg: | Black- Gloss |
"1-1/4"" Moose Knuckle Touring Handlebar
Features extra pullback for a more relaxed riding position Measure 1-1/4"" diameter in the clamping area; will work with the OEM riser and clamp Notched for Throttle-By-Wire applications Drilled for internal wiring Bars include new black control clamps to replace the oversize OEM clamps Do not need to remove the stock pin in the OEM mount clamps; bars still have more than 35 degrees of adjustment Knurled clamping area Will work with hydraulic clutches Made in the U.S.A.
"1-1/4 Moose Knuckle Touring HandlebarFeatures extra pullback for a more relaxed riding position Measure 1-1/4 diameter in the clamping area, will work with the OEM riser and clamp Notched for Throttle-By-Wire applications Drilled for internal wiring Bars include new black control clamps to replace the oversize OEM clamps Do not need to remove the stock pin in the OEM mount clamps, bars still have more than 35 degrees of adjustment Knurled clamping area Will work with hydraulic clutches Made in the U.S.A. Accepts H-D OEM heated grips
"
Kundomdömen
Se fler varor
"Complete Stainless Braided Handlebar Cable/Brake Line Kit
Take ""cable calculation"" headaches...
Take ""cable calculation"" headaches...
10650 kr
"Hefty Handlebar Riser & Top Clamp Kit
Fit handlebars with 1-1/4"" diameter clamping areaSold a...
Fit handlebars with 1-1/4"" diameter clamping areaSold a...
4430 kr
"1-1/4"" Twin Peaks Touring Handlebar
Handlebars with an emphasis on touring comfortMore parall...
Handlebars with an emphasis on touring comfortMore parall...
6100 kr
