Base Color: Black
Features: Accepts Heated Grips| Knurled Center| Notched for Throttle-By-Wire| Pre-Drilled
Width: 85 cm (33-1/2 )
Units: Each
Base Finish: Gloss
Material: Steel
Center Width: 18 cm (7 )
Rise: 33 cm (13 )
Type/Bend: Hefty| Twin Peaks
End Rise: 33 cm (13 )
Handlebar Diameter: 38 mm (1-1/2 )
Product Name: Handlebar
Pullback/Sweep: 15 cm (6 )
Color/Finish: Black| Gloss
La Choppers Handlebar Grande Tp 13B
6470 kr
- Översikt
- Passar till
Ge ditt omdöme
Artikelnummer: 06014475
Leveranstid:
Frakt:
1-1/2 Grande Twin Peaks Hefty Handlebar
Base Color: Black
Features: Accepts Heated Grips| Knurled Center| Notched for Throttle-By-Wire| Pre-Drilled
Width: 85 cm (33-1/2 )
Units: Each
Base Finish: Gloss
Material: Steel
Center Width: 18 cm (7 )
Rise: 33 cm (13 )
Type/Bend: Hefty| Twin Peaks
End Rise: 33 cm (13 )
Handlebar Diameter: 38 mm (1-1/2 )
Product Name: Handlebar
Pullback/Sweep: 15 cm (6 )
Color/Finish: Black| Gloss
| Enhet: | Styck |
| Material: | Steel |
| Produkt-typ: | Handlebar |
| Tillverkarens Art. Nr.: | LA-7363-13B |
| Färg: | Black- Gloss |
"1-1/2"" Grande Twin Peaks Hefty Handlebar
Separate 1-1/2"" risers required for mounting Knurled clamping area Will work with hydraulic clutches Mitered top with a traditional two-bend bottom Slotted for internal wiring Notched for Throttle-By-Wiring capability Made in the U.S.A. Not for use with stock riser and handlebar clamp/gauge mount on XL 883C/1200C models Accepts OEM heated grips
"1-1/2 Grande Twin Peaks Hefty HandlebarFeatures a 1-1/2 diameter in the handlebar clamping area 1-1/2 risers and clamp required for mounting 3-1/2 on-center knurled clamping area Will work with hydraulic clutches Mitered top with a traditional two-bend bottom Slotted for internal wiring Notched for Throttle-By-Wiring capability Made in the U.S.A. Not for use with stock riser and handlebar clamp/gauge mount on XL 883C/1200C models Accepts OEM heated grips
"
Kundomdömen
Se fler varor
"1-1/4"" Handlebar
For use in 1"" stock-style handlebar clampsAccept standard bar grips and con...
For use in 1"" stock-style handlebar clampsAccept standard bar grips and con...
4870 kr
"Handlebar Clamp Set
Fit under the stock coverInclude all necessary installation hardwareCNC-ma...
Fit under the stock coverInclude all necessary installation hardwareCNC-ma...
2770 kr