"Easy Start Cam Kit for Twin Cam

Start any engine regardless of displacement or compression ratio with a stock starter

Save your starter and battery; tested for 10,000 starts without running battery down

Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance

All chain-drive cams include installation kit

All gear-drive cams include 4-gear set and installation kit

For 88/95/96/103 cubic-inch engines

Compression ratios below 10:1

Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

Due to the inherent characteristics of gear drives, you may experience more valve train noise.

Not for models with OEM compression releases.

Made in the U.S.A.

Exhaust Close: 37,5°
Intake Lift at TDC Imperial: 0.115 inch
Intake Lobe Centerline Imperial: 102°
Exhaust Duration: 276°
Exhaust Duration Imperial: 276°
Exhaust Open Imperial: 58.5°
Intake Duration: 243°
Intake Close: 43,5°
Exhaust Lift at TDC Imperial: 0.175 inch
Exhaust Lobe Centerline Imperial: 100.5°
Grind: 635 Series
Intake Lift: 0,635 inch
Application: Exhaust| Intake
Exhaust Lift Imperial: 0.635 inch
Exhaust Close Imperial: 37.5°
Exhaust Lobe Centerline: 100,5°
Intake Open Imperial: 19.5°
Product Name: Cam Kit
Model: Easy Start
Units: Kit
Intake Open: 19,5°
Intake Lobe Centerline: 102°
Type: Gear
Exhaust Open: 58,5°
Intake Lift Imperial: 0.635 inch
Intake Lift at TDC: 0,115 inch
Exhaust Lift: 0,635 inch
Exhaust Lift at TDC: 0,175 inch
Intake Duration Imperial: 243°
Features: Includes Installation Kit
Intake Close Imperial: 43.5°
"