"Easy Start Cam Kit for Twin Cam

Start any engine regardless of displacement or compression ratio with a stock starter

Save your starter and battery; tested for 10,000 starts without running battery down

Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance

All chain-drive cams include installation kit

All gear-drive cams include 4-gear set and installation kit

For 88/95/96/103 cubic-inch engines

Compression ratios below 10:1

Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

Due to the inherent characteristics of gear drives, you may experience more valve train noise.

Not for models with OEM compression releases.

Made in the U.S.A.

Application: Exhaust| Intake
Exhaust Open: 45°
Exhaust Close Imperial: 26°
Intake Close: 49°
Intake Open Imperial: 20°
Product Name: Cam Kit
Units: Kit
Grind: HP103
Exhaust Lift: 0,575 inch
Intake Duration: 249°
Type: Gear
Features: Includes Installation Kit
Intake Close Imperial: 49°
Exhaust Duration: 251°
Exhaust Duration Imperial: 251°
Intake Duration Imperial: 249°
Intake Open: 20°
Exhaust Open Imperial: 45°
Exhaust Close: 26°
Exhaust Lift Imperial: 0.575 inch
Intake Lift Imperial: 0.575 inch
Intake Lift: 0,575 inch
Model: Easy Start
"