"Easy Start Cam Kit for Twin Cam

Start any engine regardless of displacement or compression ratio with a stock starter

Save your starter and battery; tested for 10,000 starts without running battery down

Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance

All chain-drive cams include installation kit

All gear-drive cams include 4-gear set and installation kit

For 88/95/96/103 cubic-inch engines

Compression ratios below 10:1

Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

Due to the inherent characteristics of gear drives, you may experience more valve train noise.

Not for models with OEM compression releases.

Made in the U.S.A.

Exhaust Open: 60°
Exhaust Lobe Centerline: 110°
Intake Lift at TDC: 0,189 inch
Exhaust Duration Imperial: 260°
Exhaust Lobe Centerline Imperial: 110°
Intake Close: 55°
Intake Open: 20°
Intake Lift at TDC Imperial: 0.189 inch
Model: Easy Start
Exhaust Lift at TDC: 0,184 inch
Intake Open Imperial: 20°
Exhaust Lift: 0,625 inch
Type: Chain
Exhaust Lift Imperial: 0.625 inch
Exhaust Close: 20°
Application: Exhaust| Intake
Exhaust Open Imperial: 60°
Intake Lobe Centerline Imperial: 107.5°
Exhaust Duration: 260°
Features: Includes Installation Kit
Intake Close Imperial: 55°
Exhaust Lift at TDC Imperial: 0.184 inch
Intake Duration: 255°
Intake Lift: 0,625 inch
Intake Lobe Centerline: 107,5°
Intake Duration Imperial: 255°
Intake Lift Imperial: 0.625 inch
Product Name: Cam Kit
Exhaust Close Imperial: 20°
Units: Kit
Grind: 625 Series
"