Artikelnummer: 09250179
Grind Cam
Cams work well with fuel injection or carburetor modelsRun best with low restriction exhausts (1700-5200 rpm)Works well with carbs or fuel injectionBolt-in cam for more torque with stock compressionCan be used with stock valve springs and tappetsSimilar to the EV-23 camAll Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications, 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.Hi-lift Performance cam for 95-107 inches, 10.0 to 10.8 compression ratio with high-flow head setup (2600-6400+ RPM)
Intake Open: 24°
| Enhet: | Par |
| Produkt-typ: | Cam Kit |
| Tillverkarens Art. Nr.: | 216367G |
Grind CamCams work well with fuel injection or carburetor modelsRun best with low restriction exhausts (1700-5200 rpm)Works well with carbs or fuel injectionBolt-in cam for more torque with stock compressionCan be used with stock valve springs and tappetsSimilar to the EV-23 camAll Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications, 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.Hi-lift Performance cam for 95-107 inches, 10.0 to 10.8 compression ratio with high-flow head setup (2600-6400+ RPM)Intake Open: 24°
