Width: 89 cm (35 )
Base Finish: Gloss
Features: Accepts Heated Grips| For Hydraulic Clutch| Knurled Center| Notched for Throttle-By-Wire| Pre-Drilled
Pullback/Sweep: 28 cm (11 )
Color/Finish: Black| Gloss
Handlebar Diameter: 32 mm (1-1/4 )
Material: Steel
Product Name: Handlebar
Center Width: 23 cm (9 )
Clamping Diameter: 32 mm (1-1/4 )
Units: Each
End Rise: 20,5 cm (8 )
Type/Bend: Touring
Base Color: Black
Controls Diameter: 25,4 mm (1 )
La Choppers 20,32 Cm (8") Handlebar Moose Knuckle / Black-Gloss Handle
4370 kr
- Översikt
- Passar till
Ge ditt omdöme
Artikelnummer: 06013849
Leveranstid:
Frakt:
1-1/4 Moose Knuckle Touring Handlebar
Width: 89 cm (35 )
Base Finish: Gloss
Features: Accepts Heated Grips| For Hydraulic Clutch| Knurled Center| Notched for Throttle-By-Wire| Pre-Drilled
Pullback/Sweep: 28 cm (11 )
Color/Finish: Black| Gloss
Handlebar Diameter: 32 mm (1-1/4 )
Material: Steel
Product Name: Handlebar
Center Width: 23 cm (9 )
Clamping Diameter: 32 mm (1-1/4 )
Units: Each
End Rise: 20,5 cm (8 )
Type/Bend: Touring
Base Color: Black
Controls Diameter: 25,4 mm (1 )
| Enhet: | Styck |
| Material: | Steel |
| Produkt-typ: | Handlebar |
| Tillverkarens Art. Nr.: | LA-7312-07B |
| Färg: | Black- Gloss |
"1-1/4"" Moose Knuckle Touring Handlebar
Features extra pullback for a more relaxed riding position Measure 1-1/4"" diameter in the clamping area; will work with the OEM riser and clamp Notched for Throttle-By-Wire applications Drilled for internal wiring Bars include new black control clamps to replace the oversize OEM clamps Do not need to remove the stock pin in the OEM mount clamps; bars still have more than 35 degrees of adjustment Knurled clamping area Will work with hydraulic clutches Made in the U.S.A.
"1-1/4 Moose Knuckle Touring HandlebarFeatures extra pullback for a more relaxed riding position Measure 1-1/4 diameter in the clamping area, will work with the OEM riser and clamp Notched for Throttle-By-Wire applications Drilled for internal wiring Bars include new black control clamps to replace the oversize OEM clamps Do not need to remove the stock pin in the OEM mount clamps, bars still have more than 35 degrees of adjustment Knurled clamping area Will work with hydraulic clutches Made in the U.S.A. Accepts H-D OEM heated grips
"
Kundomdömen
Se fler varor
Handlebar Riser Extension
The simple solution to adding a little rise and pullback to your hand...
The simple solution to adding a little rise and pullback to your hand...
870 kr
"1-1/4"" Bagger Prime Ape Handlebar
Designed for all day comfort riding with aggressive styling...
Designed for all day comfort riding with aggressive styling...
6970 kr
"Midnight Braided Brake Line Kit
Take ""cable calculation"" headaches out of swapping handlebar...
Take ""cable calculation"" headaches out of swapping handlebar...
2960 kr
"Standard Black Vinyl Braided Handlebar Cable/Brake Line Kit
Standard kits include clutch line,...
Standard kits include clutch line,...
5470 kr